APC Smart-UPS, Line Interactive, 2200VA, Rackmount 2U, 230V, 8x IEC C13+2x IEC C19 outlets, Network Card, AVR, LCD
SMT2200RMI2UNC
Environmental performance of the product Learn more
This product is compatible with
Specifications
| Presentation | Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. |
|---|---|
| Lead time | Usually in Stock |
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 198-1980 W | |
|---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
| Main Input Voltage | 230 V |
| Other Input Voltage | 220 V 240 V |
| Main Output Voltage | 230 V |
| Other Output Voltage | 220 V 240 V |
| rated power in W | 1980 W |
| rated power in VA | 2200 VA |
| Input Connection Type | BS1363A British IEC 320 C20 Schuko CEE 7 / EU1-16P |
| nb of power socket outlets | 8 IEC 320 C13 3 IEC Jumpers 1 IEC 320 C19 |
| number of rack unit | 2U |
| cable length | 2.00 m |
| number of cables | 1 |
| battery type | Lead-acid battery |
| provided equipment | CD with software Documentation CD Installation guide Rack mounting hardware Rack mounting support rails Smart UPS signalling RS-232 cable Temperature probe USB cable |
| Number of power module filled slots | 0 |
|---|---|
| Number of power module free slots | 0 |
| product web sub-family | Network card pre-installed |
| redundant | No |
| height | 8.6 cm |
|---|---|
| width | 48 cm |
| depth | 68.3 cm |
| net weight | 42.22 kg |
| mounting location | Front |
| mounting preference | Lower |
| mounting mode | Rack-mounted |
| two post mountable | 0 |
| USB compatible | No |
| input voltage limits | 151...302 V adjustable 160...286 V |
|---|---|
| network frequency | 50/60 Hz +/- 3 Hz auto-sensing |
| Maximum configurable power in VA | 2200 VA |
|---|---|
| Maximum configurable power in W | 1980 W |
| Transfer time | 4 ms typical : 8 ms maximum |
| UPS type | Line interactive |
| Wave type | Sine wave |
| output frequency | 50/60 Hz +/- 3 Hz sync to mains |
| product certifications | CE EAC IRAM RCM VDE |
|---|---|
| marking | GS Mark |
| standards | EN 60950 EN/IEC 62040-1 EN/IEC 62040-2 |
| acoustic level | 55 dBA |
|---|---|
| heat dissipation | 215 Btu/h |
| operating altitude | 0...10000 ft |
| ambient air temperature for operation | 0…40 °C |
| ambient air temperature for storage | -15…45 °C |
| storage altitude | 0.00…15240.00 m |
| relative humidity | 0…95 % |
| storage Relative Humidity | 0…95 % |
| Run Time | View Runtime Graph |
|---|---|
| Efficiency | View Efficiency Graph |
| additional information | Configurable for 220 : 230 or 240 nominal output voltage |
| extended runtime | 0 |
| number of battery filled slots | 0 |
| number of battery free slots | 0 |
| Battery recharge time | 3 h |
| number of battery replacement quantity | 1 |
| battery life | 3…5 year(s) |
| Battery power in VAH | 509 VAh runtime |
| battery charger power | 169 W rated |
| alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
|---|---|
| control panel | LED status display with on line : on battery : replace battery and overload indicators Multifunction LCD status and control console |
| Emergency power off | Optional |
| preinstalled device | Network management card 2 with environmental monitoring |
| Surge energy rate | 375 J |
|---|
| Package 1 Weight | 49.63 kg |
|---|---|
| Package 1 Height | 25.4 cm |
| Package 1 width | 60 cm |
| Package 1 Length | 98 cm |
| Number of Units in Package 3 | 8 |
| Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn moreResource performance
Energy efficient product
Take-back program available
Well-being performance
REACh Regulation
EU RoHS Directive
Compliant
Environmental Disclosure
Circularity Profile
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.