Consultar las preguntas frecuentes



Which SmartSlot accessories are supported by the Galaxy 3500 (g3500) UPS?
Unfortunately, if you use the included APC accessory terminal screw board with the ap9610, the front panel/UPS door will not close ...
When should I install the secondary grounding cable to my rack automatic transfer switch ?
The supplementary chassis ground terminal connection is recommended for installations to the meet their requirements if the known or measured leakage current exceeds 3. ...
Video: Data Center Expert | Managing Users
7) Click Finish to finish the user additions /removals.
UPDATED MARCH-2016: Unable to access my APC Network Management Card (NMC) enabled device via HTTPS (SSL/TLS)
... entirely or an additional issue. ... PDPMXXX Modular Power Distribution , AP9361 Rack ... ... devices will be updated to work with ... PDPMXXX Modular Power Distribution ... acrc2g ACRC3XXX AOS v6.3.2 and higher No, pending release tentatively for end of Q3 2015. ... If there are any questions, problems, or concerns related to the content of this article, please contact your local technical support team for further assistance.
How do you install an Isolated Extension Cable with a Share-UPS?
Accessory Guidelines If you want to ensure UPS ON capability, connect the accessory to the UPS end .
NetBotz Fiber Pod Extender
... local and remote ends . Maximum of 1 hub can be connected to the Remote Extender Unit to extend an additional 16 feet or 5 meters. ... Both ends of the Fiber Pod Extender must be powered. ... The fiber cabling must provide a duplex connection and be terminated with MT-RJ connectors at both ends . To ensure proper operation, only 62.5/125 multimode or 50 /125 multimode cabling should be used to connect the Local Extender Unit to the Remote Extender Unit.
StruxureWare Central reports NetBotz sensor values when the device is actually offline
... from NetBotz appliances at a configurable scheduled interval, DCE will report it's last known value until a further data collect takes place.
Are there any NetShelter products or solutions certified by Cisco?
NetShelter SX Accessories ... -Rack Power Distribution with Cisco Energywise ... Being Cisco Certified isn't the " end all be all" for solutions.
Video: Why is my AP8XXX Rack PDU reporting communications lost with Phase Meter?
... AP8XXX Rack Power Distribution ... PDU firmware is up to date by visiting and looking for the latest SFRPDU2G ... - Rack Power Distribution to filter the ... Contact APC Support for replacement options or if you have any additional questions. ... The following video offers a tutorial for replacing the Display Module (0J-0G-9473, 0J-0G-9470, 0J-0M-81332) within APC Second Generation (Gen 2) Rack Power Distribution Units (PDU) AP8XXX:


Resultados 1 - 10 de 65

¿No encuentras lo que buscas?

Ponte en contacto con nuestro equipo de atención al cliente para obtener información sobre asistencia técnica, asistencia para quejas, etc.