+ 2
APC Back-UPS, 500VA/300W, Tower, 230V, 4x IEC C13 Outlets , User Replaceable Battery
BK500EI
Replacement battery (1) is available
Environmental performance of the product Learn more
Sustainable by Design
Transparency
Assessment of the product environmental impacts along its life-cycle and availability of the data through a Product Environmental Profile.
TransparencyRoHS/REACh
Compliant with RoHS/REACh regulations
RoHS/REAChTransparency
Assessment of the product environmental impacts along its life-cycle and availability of the data through a Product Environmental Profile.
TransparencyRoHS/REACh
Compliant with RoHS/REACh regulations
RoHS/REACh
Compatible Software
Description
This product is part of the Back-UPS range. The BK550EI features a total of 6 power outlets, 3 of which are UPS battery backup and 3 that are surge only. Its runtime at 100W is 24 minutes 20 seconds It provides data line protection with a RJ45 analog phone line for phone or fax or modem or DSL. Its dimensions are 16.5 x 9.1 x 28.4 cm and 6.32kg. The BK550EI ensures office systems and their valuable data are protected from dangerous power surges, spikes and blackouts.
Specifications
| Lead time | Usually in Stock |
|---|
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 30-300 W | |
|---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
| Main Input Voltage | 230 V |
| Main Output Voltage | 230 V |
| Rated power in W | 300 W |
| Rated power in VA | 500 VA |
| Input Connection Type | IEC 60320 C14 |
| output connection type | 3 IEC 60320 C13 1 IEC 60320 C13 surge 2 IEC Jumpers surge |
| Number of cables | 2 |
| Battery type | Lead-acid battery |
| Provided equipment | CD with software Documentation CD 1 x detachable IEC power cord 1 x detachable 1.2 m IEC power cord Telephone cable USB cable Warranty card |
| Max runtime | 45 min |
|---|---|
| Number of power module free slots | 0 |
| Number of power module filled slots | 0 |
| Redundant | No |
| Colour | Beige |
|---|---|
| Height | 16.5 cm |
| Width | 9.1 cm |
| Depth | 28.4 cm |
| Net weight | 6.32 kg |
| Mounting location | Front |
| Mounting preference | No preference |
| Mounting mode | Not rack-mountable |
| Two post mountable | 0 |
| USB compatible | No |
| Network frequency | 47...63 Hz 50/60 Hz +/- 3 Hz auto-sensing |
|---|---|
| Input voltage limits | 160...300 V adjustable 180...266 V |
| Maximum input current | 7 A |
| Switching current capacity | 7 A |
| Maximum configurable power in W | 300 W |
|---|---|
| Output frequency | 47...63 Hz sync to mains 50/60 Hz +/- 1 Hz unsynchronised |
| UPS type | Standby |
| Wave type | Stepped approximation to a sinewave |
| Maximum configurable power in VA | 500 VA |
| Transfer time | 6 ms typical : 10 ms maximum |
| Product certifications | C-Tick CE GOST VDE |
|---|---|
| Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 |
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| Relative humidity | 0…95 % |
| Operating altitude | 0...10000 ft |
| Ambient air temperature for storage | -15…45 °C |
| Storage Relative Humidity | 0…95 % |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 40 dBA |
| Heat dissipation | 24 Btu/h |
| Run Time | View Runtime Graph |
|---|---|
| Efficiency | View Efficiency Graph |
| Number of battery filled slots | 0 |
| Number of battery free slots | 0 |
| Battery recharge time | 8 h |
| Number of battery replacement quantity | 1 |
| Battery voltage | 12 V |
| Battery capacity | 7.0 Ah |
| Battery charger power | 10 W rated |
| Battery power in VAH | 83 VAh capacity 84 VAh runtime |
| Battery life | 4…6 year(s) |
| Replacement battery | RBC2 |
| Extended runtime | 0 |
| Free slots | 0 |
|---|---|
| Control panel | LED status display with on line : on battery : replace battery and overload indicators |
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Surge energy rate | 310 J |
|---|---|
| Noise suppression | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Unit Type of Package 1 | Db |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 17.8 cm |
| Package 1 Width | 24.1 cm |
| Package 1 Length | 36.8 cm |
| Package 1 Weight | 7.05 kg |
| Unit Type of Package 2 | PAL |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 133 cm |
| Package 2 Width | 100 cm |
| Package 2 Length | 120 cm |
| Package 2 Weight | 490 kg |
| SCC14 | 10731304016356 |
| Warranty | 2 years repair or replace |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn more
Well-being performance
REACh free of SVHC
Certifications & Standards
REACh Regulation
EU RoHS Directive
Environmental Disclosure
Circularity Profile
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.