{"searchBar":{"inputPlaceholder":"Шукайте за ключовим словом або запитайте","searchBtn":"Пошук","error":"Введіть ключове слово для пошуку"}}
{}

Наші бренди

{"support":{"yesButton":"Так","noButton":"Ні","feedback":{"title":"Що можна зробити для вдосконалення функції?"},"submitButton":"Надіслати","successMessage":"Дякуємо за відгук!","title":"Чи стало це в пригоді?","feedbackPercentLabel":"відгуків про те, що це стало в пригоді","captcha":{"error":"Установіть прапорець"}}}
Пошук відповідей на запитання

How to assign a fixed IP address to SmartConnect enabled Smart-UPS

Issue:
Would like it configure SmartConnect enabled Smart-UPS with a fixed IP address AKA static IP address.

Product Line:
SMTL, SCL, SMT, SMC, SMX, model Smart-UPS with embedded SmartConnect network port.

Environment:
Smart-UPS with embedded SmartConnect network port


Cause:
Informational

Solution:

For SMT with firmware 4.1 or greater and SMTL or SMX model Smart-UPS 
From the LCD panel scroll to Configuration and using the down arrow scroll to Menu Type. Set the menu type to Advanced. Then using the down arrow scroll to UPS IP Address Settings and press enter. From the UPS IP Address Setting menu you can change from DHCP to Manual and enter a static IP address, subnet mask, gateway, and DNS. 

 
For SMT model with firmware less than 4.1 and all SCL, SMC models
To set a fix IP address for the embedded SmartConnect network port you must log into the router the UPS is connected to via the network. Find the mac address of the UPS that has registered with the router. The mac address is the product ID number. It will be found on the sticker on top or the back of the UPS. 

Back of SMTL 2.jpg
Depending on the router you will allocate an IP address to a specific mac address or reserve an IP for a specific mac address. See the router user's guide for assistance. 

Не вдалося знайти бажане?

Якщо вам потрібна допомога, технічна підтримка або ви хочете подати скаргу, зв’яжіться з нашою командою з обслуговування клієнтів.