APC Power-Saving Back-UPS Pro 1000VA

APC Power-Saving Back-UPS Pro 1000VA Front Left
APC Power-Saving Back-UPS Pro 1000VA Front Left
APC Power-Saving Back-UPS Pro 1000VA Front Left
APC Power-Saving Back-UPS Pro 1000VA Front Straight
APC Power-Saving Back-UPS Pro 1000VA Back
APC Power-Saving Back-UPS Pro 1000VA Packaging
APC Power-Saving Back-UPS Pro 1000VA Front Left
APC Power-Saving Back-UPS Pro 1000VA Front Straight
APC Power-Saving Back-UPS Pro 1000VA Back
APC Power-Saving Back-UPS Pro 1000VA Packaging
  • High Performance Computer and Electronics UPS for Premium Power Protection

View Product Overview
Sorry, currently we don't have additional content for this product, but we are working on it.
Want additional product information?
Load the product overview with videos, comparison and features.

BR1000G Features

Key Features

Run time for load
Run time for load
Enter the total load (power draw) of all devices to be protected by the UPS here. Based on the value entered we will estimate the run time that you will have during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.

The total load (power draw) entered exceeds the maximum value for this product (600 W)

Please enter load to see estimated run time

The total load (power draw) entered is less than the minimum value for this product ({} W)

Max. Capacity Used
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.

Please enter load to see calculated "Max. Capacity Used"

Output power capacity
600 Watts / 1.0kVA
Output Connections
(4) NEMA 5-15R (Surge Protection)
(4) NEMA 5-15R (Battery Backup)
Nominal Output Voltage
Nominal Input Voltage
Input Connections
NEMA 5-15P
Cord Length
6ft (1.8meters)
Maximum Input Current
APC Power-Saving Back-UPS Pro 1000VA
High Performance Computer and Electronics UPS for Premium Power Protection
  • Building Wiring Fault Indicator
    This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Lifetime data recovery warranty
    Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

Back-UPS Pro Features & Benefits


Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.


Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.

Marketing features

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment


Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.


Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).


Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Product Distribution

Anguilla, Netherlands Antilles, Aruba, Barbados, Bermuda, Bolivia, Bahamas, Belize, Canada, Chile, China, Colombia, Costa Rica, Czech Republic, Dominica, Dominican Republic, Ecuador, Grenada, Guatemala, Guyana, Honduras, Haiti, Italy, Jamaica, Saint Kitts And Nevis, Saint Lucia, Madagascar, Mauritius, Mexico, Nicaragua, Panama, Peru, Puerto Rico, Reunion, Slovakia, El Salvador, Turks And Caicos Islands, Trinidad and Tobago, United States, Saint Vincent And The Grenadines, Venezuela, U.S. Virgin Islands, Mayotte

Technical Specifications


Max Configurable Power (Watts)
600 Watts / 1.0kVA
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Line interactive
Waveform type
Stepped approximation to a sinewave
Transfer Time
8 ms typical : 12 ms maximum


Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
88 - 148V
Number of Power Cords

Batteries & Runtime

Battery type
Lead-acid battery
Typical recharge time
Replacement Battery
Expected Battery Life (years)
3 - 5
RBC Quantity
Battery Charge Power (Watts)
20 Watts

Communications & Management

Interface Port(s)
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating
Data Line Protection
Coaxial cable for CATV/SATV/modem/audio-video, RJ45 network line - 10/100/1000 Base-T Ethernet
Full time multi-pole noise filtering : 5% of IEEE surge let-through : zero clamping response time: instantaneous


Maximum Height
9.84inches (250MM, 25.0CM)
Maximum Width
3.94inches (100MM, 10.0CM)
Maximum Depth
15.04inches (382MM, 38.2CM)
Net Weight
23.63lbs. (10.72KG)
Shipping weight
25.79lbs. (11.7KG)
Shipping Height
13.27inches (337MM, 33.7CM)
Shipping Width
8.86inches (225MM, 22.5CM)
Shipping Depth
19.17inches (487MM, 48.7CM)
Master Carton Units
Pallet Dimensions
Pallet Weight
Units per Pallet
SCC Codes


Operating Temperature
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95 %
Operating Elevation
0 - 9842ft (0 - 2999.84meters)
Storage Temperature
-15 - 45 °C
Storage Relative Humidity
0 - 95 %
Storage Elevation
0 - 49212.01ft (0 - 14999.8meters)
Audible noise at 1 meter from surface of unit
Online thermal dissipation


DOC/Industry Canada, UL listed
Equipment protection policy
Lifetime : $150000
Standard warranty
3 years repair or replace

Sustainable Offer Status

Available in Documentation tab
Available in Documentation tab