Welcome to Trade-UPS

APC Trade-UPS is a 1-phase UPS program that offers new and existing customers the ability to trade in older battery backup units for the most up-to-date 1-phase power protection models at discounted prices.

More about the program Program rules

1 Add Trade-ins
2 Choose New UPS
3 choose accessories

Select UPS(s) for your purchase. Continue to add units until you meet your minimum Trade-UPS requirement of

Trade-in UPS summary

Number of trade-ins:0

Trade-in VA total:0 VA

New trade-UPS VA range

Trade-UPS target VA range

0 VA 0 VA

min. max.

New UPS summary

Number of new UPS(s):0

New UPS VA total:0 VA

Back to Trade-ins Step 3 Back to Trade-ins

NetShelter SV 48U 800mm Wide x 1200mm Deep Enclosure with Sides Black

AR2587

In stock

$2,210.00

AR2587

NetShelter SV 48U 800mm Wide x 1200mm Deep Enclosure with Sides Black

Wide, Deep and Tall Universal IT enclosure with increased enclosure width for more cable management options in denser server and networking applications. Includes integrated vertical 1U mounting spaces adjacent the enclosures standard EIA-310 equipment mounting u-spaces that can be removed and replaced with 1U accessories. Enclosures are deep to provide additional equipment clearance space or more open space for ease of access in the rear of the enclosure. 48U height for environments that can take advantage of higher spaces and provide more mounting u-spaces at each enclosure footprint.

Includes : (4) Bolt down brackets , Baying hardware , Doors , Key(s) , Keyed-alike doors and side panels , Leveling feet , Mounting hardware , Pre-installed casters , Roof , Side panels , Unpacking sheet

Integrated vertical 1U mounting spaces

800mm (32 in) wide enclosures include vertical 19" width 1U knockouts adjacent the enclosures standard EIA-310 equipment mounting u-spaces that can be removed and replaced with 1U accessories. Replace these knockouts with accessories such as patch panels, environmental management devices, Rack Power Distribution, or even pass-through brush strips for cabling pass-through.

NetShelter SV Enclosures Features & Benefits

Safety

Integrated electrical grounding

The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.
Enclosure to floor bolt-down brackets provided

Enclosure is delivered with bolt-down brackets that secure the enclosure to the pallet during shipment. These same bolt-down brackets can be utilized to bolt the enclosure to the floor at the final installation site.

Compatiblity

Vendor-neutral EIA-310 19in Rack Mounting Compatibility Guaranteed

Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The "Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter.
Schneider Electric Rack Systems Compatible

Compatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.

Convenience

Removable full-height side panels

Side panels are removable for ease of access to the enclosure during equipment installation and setup. Side panels are lockable utilizing a single key that is also usable on the front and rear doors.
Enclosure adjustment tools and hardware provided

All enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.
Cable access openings and panels

Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Brushes included in roofs for 800mm (32 in) wide enclosures.
Quick release doors with spring pin design

Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple spring hinge pin design.
Perforated front and rear doors

Perforated front and rear doors provide ample ventilation for rack-mount equipment.
Simple Selection

No need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.

Agility

Unassembled enclosure option (42U x 600mmW x 1060mmD) for unique sites

Not all installation sites have space clearance required to move and install standard height enclosures. This unassembled option is packaged for transport through narrow spaces and assembly at the installation site.
Joining hardware provided

Enclosures include pre-installed joining hardware for joining enclosures in a row and provide additional stability to the enclosure. Enclosures are pre-installed with joining brackets for joining enclosures on 600-mm centers. Joining brackets for joining enclosures on 24-in centers are included with the provided hardware kit.
Standard-profile castors and adjustable leveling feet from underneath

Enclosures are shipped standard with both leveling feet and castors. Leveling feet can be adjusted using a wrench from underneath the enclosure.
Adjustable mounting rails with simple alignment

The vertical mounting rails can be adjusted in 0.4 in (10 mm) increments covering virtually any mounting requirement for IT equipment. Align the mounting rails with the opposite side of the enclosure by identifying the hole position used. U positions are numbered front and back for rapid installation of equipment.
Split rear doors

Split rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.
Pre-installed rear accessory mounting brackets

Integrated and adjustable rear accessory mounting brackets provide zero U mounting locations for toolless accessories. Each bracket has two mounting bays to support a combination of up to four accessories such as Rack PDUs and vertical cable organizers mounted inside the rack. Adjust the brackets from their standard factory positions or install additional brackets (AR824002 - Qty 2) to install half enclosure height accessories such as cable managers and vertical Rack PDUs.

Product Distribution

Afghanistan , Antigua and Barbuda , Anguilla , Albania , Armenia , Netherlands Antilles , Angola , Argentina , Australia , Aruba , Azerbaijan , Bosnia and Herzegovina , Barbados , Burkina Faso , Bahrain , Burundi , Benin , Bermuda , Bolivia , Bahamas , Botswana , Belarus , Belize , Canada , The Democratic Republic Of Congo , Côte d'Ivoire , Chile , Cameroon , China , Costa Rica , Cyprus , Djibouti , Dominica , Dominican Republic , Ecuador , Eritrea , Ethiopia , Fiji , Gabon , Grenada , Georgia , French Guiana , Ghana , Gambia , Guadeloupe , Guatemala , Guyana , Honduras , Haiti , Iraq , Iceland , Jamaica , Jordan , Kenya , Cambodia , Saint Kitts And Nevis , Kuwait , Cayman Islands , Lebanon , Saint Lucia , Liberia , Luxembourg , Madagascar , Mali , Myanmar , Mongolia , Martinique , Mauritania , Malta , Mauritius , Malawi , Mexico , Mozambique , Namibia , Nicaragua , Oman , Panama , Pakistan , Puerto Rico , Paraguay , Reunion , Rwanda , Sierra Leone , Senegal , Somalia , Suriname , El Salvador , Turks And Caicos Islands , Togo , Tajikistan , Turkmenistan , Trinidad and Tobago , Tanzania , Uganda , United States , Uruguay , Uzbekistan , Saint Vincent And The Grenadines , Venezuela , U.S. Virgin Islands , Yemen , Mayotte , Zambia , Zimbabwe

Print Technical Specification

Physical

Maximum Height
91.5inches ( 2324MM , 232.4CM )
Maximum Width
31.5inches ( 800MM , 80.0CM )
Maximum Depth
47.24inches ( 1200MM , 120.0CM )
Rack Height
48U
Net Weight
336.87lbs. ( 152.8KG )
Shipping weight
385.66lbs. ( 174.93KG )
Shipping Height
96.38inches ( 2448MM , 244.8CM )
Shipping Width
35.43inches ( 900MM , 90.0CM )
Shipping Depth
51.18inches ( 1300MM , 130.0CM )
Color
Black
Maximum Mounting Depth
36.1inches ( 917.0MM , 91.69CM )
Minimum Mounting Depth
6.6inches ( 168.0MM , 16.76CM )
Front Door
16.0gauge
Vertical Posts
18.0gauge
Rear Door
16.0gauge
Roof
19.0gauge
Side Panels
18.0gauge
Rack Width
19"
Weight Capacity (static load)
2204.99lbs. ( 1000.17KG )
Weight Capacity (dynamic load)
1013.99lbs. ( 459.94KG )

Environmental

Protection Class
IP20

Conformance

Approvals
EIA-310E, UL 2416, UL 60950-1
Standard warranty
5 year repair or replace

Sustainable Offer Status

RoHS
Compliant

Manuals and Warranties

Title

Size

Updated On

Title

NetShelter SV Quick Unpacking Instructions

PDF

Size

1403KB

Updated On

04/13/21

Unpacking instructions for the NetShelter SV Enclosures

Title

NetShelter SV User Manual

PDF

Size

3125KB

Updated On

03/10/21

Installation instructions and customization options for the NetShelter SV Enclosures

Title

Size

Updated On

Racks and Enclosures, NetShelter SV

AR2587 - NetShelter SV 48U 800mm Wide x 12000mm Deep with Sides Enclosure

CAD Source File

2902KB

09/14/21

AR2587 - NetShelter SV 48U 800mm Wide x 12000mm Deep with Sides Enclosure

PDF

787KB

09/14/21

APC Rack PDU, 2G, metered, 0U, 20A, 100V to 120V, 24 NEMA 5-20R sockets

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.

AP8830

$612.00

Rack PDU 2G, Metered, ZeroU, 15A, 100-120V, (10) 5-15

AP8831

$573.00

APC Smart-UPS, Line Interactive, 3kVA, Rackmount 2U, 120V, 6x NEMA 5-15R+2x NEMA 5-20R outlets, SmartSlot, AVR, LCD, With 12ft cord

Reliable network power protection designed for deployment in retail and open access environments.

SMT3000R2X145

$1,595.00

APC Smart-UPS X, Line Interactive, 3kVA, Rack/tower convertible 2U, 100V-127V, 3x 5-15R+3x 5-20R+1x L5-30R NEMA, NMC, Extended runtime, TAA

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

SMX3KRMLVNCUS

$2,770.00