Nominal Input Voltage
APC Performance SurgeArrest 8 outlets 230V Germany
Maximum Power Surge Protection for Computers, Notebooks and Other Electronics
Includes: User manual
EMI and RFI noise filtering
Reduces line noise that can cause data loss and keyboard errors.
IEEE let-through ratings and regulatory agency compliance
APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through a surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Right Angle Plug
Plug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.
SurgeArrest Performance Features & Benefits
Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
Adjustable Cable Management
Keeps cords and cables neat and organized.
Receptacle Shock Safety Shutters
Shutters protect users from accidental contact with unused outlets.
Site wiring fault indicator
In order to work properly, surge suppressors require a correctly wired and grounded outlet. APC surge protectors identify dangerous wiring problems before you plug in your equipment.
To help organize power cords.
Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
Indicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.
Protection working indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
Reduces cord clutter.
Lightning and Surge Protection
To prevent damage to your equipment from electric power surges and spikes.
180 degree Rotating Cord Retainer
A 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.
IEEE let-through rating and UL 1449 compliance
The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".
Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
Phone Line Splitter
Allows use of two pieces of equipment at once, such as a modem and phone.
Catastrophic Event Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
Albania, Armenia, Angola, Austria, Bosnia and Herzegovina, Belgium, Bulgaria, Serbia and Montenegro, Czech Republic, Germany, Denmark, Estonia, Egypt, Spain, Ethiopia, Finland, France, Greece, Croatia, Hungary, Indonesia, Israel, Iceland, Italy, Lebanon, Lithuania, Luxembourg, Latvia, Macedonia, Netherlands, Norway, Pakistan, Poland, Portugal, Romania, Sweden, Slovenia, Slovakia, Suriname, Turkey, South Africa
Number of Outlets
Schuko CEE 7
Number of Power Cords
Surge Protection and Filtering
Surge energy rating
Peak Current Common Mode
Peak Current Normal Mode
60 per phasekAmps
Master Carton Dimensions (Length x Width x Height)
365 x 213 x 387MM
Master Carton Units
Master Carton Weight
Units per Pallet
0 - 40 °C
Operating Relative Humidity
0 - 95 (Non-condensing) %
0 - 15240meters
-15 - 45 °C
Storage Relative Humidity
0 - 95 %
0 - 15240meters
Equipment protection policy
Lifetime : 50000 euros
Limited Lifetime (European Union countries only)
Sustainable Offer Status
item(s) added to your Cart
item(s) in Cart
Complete your Solution