APC Smart-UPS RT 5000VA 230V

Share:

APC Smart-UPS RT 5000VA 230V

SURTD5000XLI

Description: High density, double-conversion on-line power protection with scalable runtime

Includes : CD with software , User Manual , Web/SNMP Management Card

APC Smart-UPS RT 5000VA 230V

Includes: CD with software , User Manual , Web/SNMP Management Card

Smart-UPS On-Line Features & Benefits

  • Power conditioning
    Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Generator compatible
    Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse.
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Predicitive failure notification
    Provides early-warning fault analysis ensuring proactive component replacement.
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Rack/Tower convertible
    Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries
    Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Flash upgradeable firmware
    Install maintenance releases of firmware remotely using FTP.
  • Serial connectivity
    Provides management of the UPS via a serial port.
  • Network manageable
    Provides remote power management of the UPS over the network.
  • InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.
  • SmartSlot
    Customize UPS capabilities with management cards.
  • LED status indicators
    Quickly understand unit and power status with visual indicators.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic restart of loads after UPS shutdown
    Automatically starts up the connected equipment upon the return of utility power.
  • Automatic internal bypass
    Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Scalable runtime
    Allows additional run time to be quickly added as needed.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader
    Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Save time with easy and convenient remote/network accessibility.
    Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management.
    Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Avoids costly power problems by keeping your IT equipment and data protected and available.
    Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Product Distribution
Product Distribution

Afghanistan , Argentina , Bangladesh , Brunei , Bhutan , Cook Islands , Fiji , Hong Kong , Indonesia , Cambodia , South Korea , Sri Lanka , Myanmar , Malaysia , Nepal , Papua New Guinea , Singapore , TP , Vietnam

Print Technical Specification

Output

  • Output power capacity
    3.5 KWatts / 5.0 kVA
  • Max Configurable Power (Watts)
    3.5 KWatts / 5.0 kVA
  • Nominal Output Voltage
    230V
  • Output Voltage Note
    Configurable for 220 : 230 or 240 nominal output voltage
  • Efficiency at Full Load
    92.0 %
  • Output Voltage Distortion
    Less than 3%
  • Output Frequency (sync to mains)
    50/60 Hz +/- 3 Hz user adjustable +/- 0.1
  • Other Output Voltages
    220, 240
  • Load Crest Factor
    3 : 1
  • Topology
    Double Conversion Online
  • Waveform type
    Sine wave
  • Output Connections
    (8) IEC 320 C13 (Battery Backup)
    (4) IEC Jumpers (Battery Backup)
    (2) IEC 320 C19 (Battery Backup)
  • Bypass
    Internal Bypass (Automatic and Manual)

Input

  • Nominal Input Voltage
    230V
  • Input frequency
    50/60 Hz +/- 5 Hz (auto sensing)
  • Input Connections
    Hard Wire 3-wire
  • Input voltage range for main operations
    160 - 280V
  • Input voltage adjustable range for mains operation
    100 - 280 (half load)V
  • Efficiency at Full Load
    92.0 %
  • Other Input Voltages
    220, 240

Batteries & Runtime

Communications & Management

  • Interface Port(s)
    RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot
  • Pre-Installed SmartSlot™ Cards
    AP9631
  • Control panel
    LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
  • Audible Alarm
    Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  • Emergency Power Off (EPO)
    Yes

Surge Protection and Filtering

  • Surge energy rating
    555JJoules
  • Filtering
    Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

  • Maximum Height
    432mm , 43.2CM
  • Maximum Width
    130mm , 13.0CM
  • Maximum Depth
    660mm , 66.0CM
  • Rack Height
    3U
  • Net Weight
    54.43KG
  • Shipping weight
    63.64KG
  • Shipping Height
    347mm , 34.7CM
  • Shipping Width
    603mm , 60.3CM
  • Shipping Depth
    980mm , 98.0CM
  • Color
    Black
  • Master Carton Units
    1.0
  • Units per Pallet
    6.0

Environmental

  • Operating Temperature
    0 - 40 °C
  • Operating Relative Humidity
    0 - 95% non-condensing %
  • Operating Elevation
    0-3000meters
  • Storage Temperature
    -15 - 45 °C
  • Storage Relative Humidity
    0 - 95% non-condensing %
  • Storage Elevation
    0-15000meters
  • Audible noise at 1 meter from surface of unit
    55.0dBA
  • Online thermal dissipation
    1057.0BTU/hr
  • Protection Class
    IP 20

Conformance

  • Approvals
    C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, UL 1778, VDE
  • Standard warranty
    2 years repair or replace, optional on-site warranties available, optional extended warranties available

Sustainable Offer Status

  • RoHS
    Compliant
  • PEP
    Available in Documentation tab
  • EOLI
    Available in Documentation tab
Manuals and Warranties
Title
Size
Updated On
PDF

Size

533KB

Updated On

2018-07-03

User manual for SURTD3000/5000 VA 200-240 Vac Tower/Rack-Mount 3U
PDF

Size

116KB

Updated On

2018-07-03

Warranty Registration Card
Brochure
Title
Size
Updated On
PDF

Size

514KB

Updated On

2018-07-03

Provides an overview of the 1-20kVA Smart-UPS On-Line offer
Agency Approvals
Title
Size
Updated On
PDF

Size

30KB

Updated On

2018-07-03

Uninteruptible Power Supply (On Line SURT 1/2/3/5/6kVA)
PDF

Size

78KB

Updated On

2018-07-03

CE Declaration of Conformity SURTD 3/5 kVA TOWER/RM3U XLI/UXI
PDF

Size

33KB

Updated On

2018-07-03

Declaration of Conformity Uninteruptible Power Supply (On Line SURT 1/2/3/5/6kVA)
PDF

Size

72KB

Updated On

2018-06-19

SKUs include SURT3000XLI,SURTD3000XLI,SURT3000XLT,SURTD3000XLT,SURT5000XLI,SURTD5000XLI,SURT5000XLIX438,SURT5000XLT,SURTD5000XLI,SURT5000XLJ,SURTD5000XLJ,SURT3000UXI,SURTD3000UXI,SURT5000UXI, SURTD5000UXI,SURT3000XLIX322,SURT6000XLI,RWRTD5000XLU,RWRT5000XLU, SURT6000XLIX547
Bid Spec
Title
Size
Updated On
Source ZIP

Size

73KB

Updated On

2018-06-12

Guide Specification
PDF

Size

119KB

Updated On

2018-06-12

Guide Specification
Environmental Profile
Title
Size
Updated On
PDF

Size

1112KB

Updated On

2018-07-03

Product Environmental Profile (ePEP) for the Smart-UPS Online Product Range
PDF

Size

1085KB

Updated On

2018-07-03

End of Life Instruction (EoLI) for the Smart-UPS Online Product Range
Title
Size
Updated On

Firmware Upgrades

Firmware Upgrades
Part Number
Updated On

Firmware Upgrades

PowerNet MIB v4.2.6

Part Number

SFPMIB426

Updated On

2018-01-24
PowerChute Network Shutdown
Part Number
Updated On

PowerChute Network Shutdown

PowerChute Network Shutdown v4.2

Compatible With: Solaris , Solaris , Linux , HP-UX , Solaris , Solaris , Linux , Microsoft Hyper-V , Windows Server 2008 , Windows Server 2012 , AIX , Mac OS X , Windows Server 2008 , Windows Server 2012

Part Number

SFPCNS42

Updated On

2016-08-23

PowerChute Network Shutdown

PowerChute Network Shutdown v4.2 for Virtualization

Compatible With: VMware Virtual Appliance , VMware ESX , VMware ESXi , Microsoft Hyper-V , Windows Server 2008 , Windows Server 2012

Part Number

SFPCNS42-V

Updated On

2017-12-21

Category

Sub-Category


2 Years of Remote Monitoring Service for (25) Nodes

A 7x24 monitoring service that acts as a primary or secondary support function. Trained technicians will monitor the health status of the physical infrastructure to help diagnose, notify and resolve problems before they become critical.

Horizontal Cable Organizer 1U

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Mounting Rail Brush Strips, NetShelter SX, 750mm Wide (AR3x5x)

Promotes proper airflow while allowing cables to be passed from the front to the rear of the rack.

Dry Contact I/O SmartSlot Card

UPS management SmartSlot Card with Dry Contact (relay) support to monitor external triggers and initiate actions on external devices.

Narrow Vertical Cable Organizer, NetShelter SX, 42U

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Power Cord, Locking C19 to IEC309-16A, 3.0m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.


Show results per page

Related Products, Accessories & Services

View all accessories and replacement batteries for this product