APC BACK-UPS ES 500VA 230V FOR ASE
-
Battery Backup & Surge Protector for Electronics and Computers
-
Includes: (1) Detachable 2.0 m NEMA 5-15P to IEC C13 power cord, User manual, Warranty card
BE500R-AS Features
Key Features
Run time for load
W
Run time for load
Enter the total load (power draw) of all devices to be protected by the UPS here. Based on the value entered we will estimate the run time that you will have during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
—
The total load (power draw) entered exceeds the maximum value for this product (300W)
Please enter load to see estimated run time
Max. Capacity Used
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
—
Please enter load to see calculated "Max. Capacity Used"
Output power capacity
300 Watts
/ 500VA
Output Connections
(3)
Universal receptacle
(Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
IEC 60320 C14
Cord Length
1.8meters
Maximum Input Current
7.0A
APC BACK-UPS ES 500VA 230V FOR ASE
Battery Backup & Surge Protector for Electronics and Computers
Includes: (1) Detachable 2.0 m NEMA 5-15P to IEC C13 power cord, User manual, Warranty card
Back-UPS Features & Benefits
Marketing features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Manageability
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Availability
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Product Distribution
Indonesia, Cambodia, Myanmar, Malaysia, Singapore, Thailand, Vietnam
Output
Max Configurable Power (Watts)
300 Watts
/ 500VA
Output Frequency (sync to mains)
47 - 53 Hz For 50 Hz nominal Sync to mains, 57 - 63 Hz For 60 Hz nominal Sync to mains
Topology
Standby
Waveform type
Stepped approximation to a sinewave
Maximum Output Current
7
Input
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
165 - 266V
Number of Power Cords
1
Batteries & Runtime
Battery type
Lead-acid battery
Typical recharge time
24hour(s)
Replacement Battery
Expected Battery Life (years)
3 - 5
Battery Charge Power (Watts)
3 Watts
Runtime
Efficiency
Communications & Management
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
180Joules
Physical
Maximum Height
96MM, 9.6CM
Maximum Width
273MM, 27.3CM
Maximum Depth
174MM, 17.4CM
Net Weight
5.91KG
Shipping weight
6.5KG
Shipping Height
118MM, 11.8CM
Shipping Width
362MM, 36.2CM
Shipping Depth
178MM, 17.8CM
Color
Charcoal
Master Carton Dimensions (Length x Width x Height)
381MM
Master Carton Units
2.0
Master Carton Weight
13.47
Units per Pallet
96.0
SCC Codes
10731304238000
Environmental
Operating Temperature
0 - 40 °C
Operating Relative Humidity
10 - 90 %
Operating Elevation
0 - 3048meters
Storage Temperature
-15 - 45 °C
Storage Elevation
0 - 15240meters
Audible noise at 1 meter from surface of unit
40.0dBA
Conformance
Standard warranty
2 years repair or replace
Sustainable Offer Status
RoHS
Compliant
PEP
Available in Documentation tab
EOLI
Available in Documentation tab