Run time for load W
Run time for load
Enter the total load (power draw) of all devices to be protected by the UPS here. Based on the value entered we will estimate the run time that you will have during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
The total load (power draw) entered exceeds the maximum value for this product (300W)
Please enter load to see estimated run time
Max. Capacity Used
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
Please enter load to see calculated "Max. Capacity Used"
Output power capacity
300Watts / 500VA
(3) IEC 60320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
(1) IEC 320 C13 (Surge Protection)
(3) IEC 320 C13 (Battery Backup)
(1) IEC 60320 C13 (Surge Protection)
Nominal Output Voltage
Nominal Input Voltage
IEC 60320 C14
APC BK 500VA 230V UPS
Battery Backup & Surge Protector for Electronics and Computers
Back-UPS Features & Benefits
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Afghanistan, Antigua and Barbuda, Anguilla, Netherlands Antilles, Argentina, Australia, Aruba, Barbados, Bermuda, Bolivia, Brazil, Bahamas, Belize, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Fiji, Grenada, Guadeloupe, Guatemala, Guyana, Hong Kong, Honduras, Haiti, Indonesia, India, Jamaica, Japan, Saint Kitts And Nevis, South Korea, Cayman Islands, Saint Lucia, Myanmar, Martinique, Mexico, Malaysia, Nicaragua, New Zealand, Panama, Peru, Philippines, Pakistan, Puerto Rico, Paraguay, Singapore, El Salvador, Turks And Caicos Islands, Thailand, Trinidad and Tobago, Taiwan, Uruguay, Saint Vincent And The Grenadines, Venezuela, U.S. Virgin Islands, Vietnam
Max Configurable Power (Watts)
300Watts / 500VA
4 ms typical : 8 ms maximum
50/60 Hz +/- 5 Hz Manual switch
Input voltage range for main operations
196 - 280V
Number of Power Cords
Batteries & Runtime
Typical recharge time
Battery Charge Power (Watts)
Battery Volt-Amp-Hour Capacity
Communications & Management
Output power on indicator LED
Alarm when on battery : distinctive low battery alarm
Surge Protection and Filtering
Surge energy rating
Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
Master Carton Units
Units per Pallet
0 - 40 °C
Operating Relative Humidity
0 - 95 %
0 - 3048meters
-15 - 45 °C
0 - 15240meters
Audible noise at 1 meter from surface of unit
Online thermal dissipation
C-Tick, CE, EN 50091-1, EN 50091-2, GOST, VDE
2 years repair or replace
item(s) added to your Cart
item(s) in Cart
Complete your Solution