Run time for load W
Run time for load
Enter the total load (power draw) of all devices to be protected by the UPS here. Based on the value entered we will estimate the run time that you will have during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
The total load (power draw) entered exceeds the maximum value for this product (390W)
Please enter load to see estimated run time
Max. Capacity Used
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
Please enter load to see calculated "Max. Capacity Used"
Output power capacity
390 Watts / 700VA
(4) IEC 60320 C13 (Battery Backup)
(1) IEC Jumpers (Battery Backup)
Nominal Output Voltage
Nominal Input Voltage
IEC 60320 C14
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes: User manual
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Telephone dataline surge protection
Provides protection of connected equipment from power surges traveling on telephone lines.
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
United Arab Emirates, Afghanistan, Albania, Armenia, Angola, Austria, Azerbaijan, Bosnia and Herzegovina, Belgium, Burkina Faso, Bulgaria, Bahrain, Burundi, Benin, Bolivia, Botswana, Belarus, The Democratic Republic Of Congo, Côte d'Ivoire, Chile, Cameroon, Cyprus, Czech Republic, Germany, Djibouti, Denmark, Algeria, Estonia, Egypt, Eritrea, Spain, Ethiopia, Fiji, France, Gabon, United Kingdom, Georgia, Ghana, Gambia, Greece, Croatia, Hungary, Indonesia, Ireland, Israel, Iceland, Italy, Jordan, Kenya, Cambodia, Kuwait, Kazakhstan, Lebanon, Liberia, Lithuania, Luxembourg, Latvia, Morocco, Madagascar, Macedonia, Mali, Myanmar, Mongolia, Martinique, Mauritania, Malta, Mauritius, Malawi, Malaysia, Mozambique, Namibia, Nigeria, Netherlands, New Zealand, Oman, Peru, Philippines, Pakistan, Poland, Portugal, Paraguay, Reunion, Romania, Russia, Rwanda, Saudi Arabia, Singapore, Slovenia, Slovakia, Sierra Leone, Senegal, Somalia, Suriname, Turks And Caicos Islands, Togo, Thailand, Tajikistan, Turkmenistan, Tunisia, Turkey, Tanzania, Ukraine, Uganda, Uruguay, Uzbekistan, Vietnam, Yemen, Mayotte, South Africa, Zambia, Zimbabwe
Max Configurable Power (Watts)
390 Watts / 700VA
Output Frequency (sync to mains)
50/60 Hz +/- 1 Hz Sync to mains
Stepped approximation to a sinewave
4 ms typical
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
140 - 300V
Number of Power Cords
Batteries & Runtime
Typical recharge time
Expected Battery Life (years)
3 - 5
Battery Charge Power (Watts)
Battery Volt-Amp-Hour Capacity
Communications & Management
LED status display with on line : on battery : replace battery and overload indicators
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
Data Line Protection
RJ11 modem/fax/DSL protection (two wire single line)
0 - 40 °C
Operating Relative Humidity
0 - 95 (Non-condensing) %
0 - 3048meters
-15 - 40 °C
0 - 9144meters
Audible noise at 1 meter from surface of unit
2 years repair or replace
Sustainable Offer Status
item(s) added to your Cart
item(s) in Cart
Complete your Solution