APC Smart-UPS VT 20kVA 400V, w/Internal Maintenance Bypass & Parallel Capability
SUVTP20KH
Discontinued on:22 October 2021
Recommended replacement(s)
Specifications
| Lead time | Special Order - Call for Quoted Lead Times |
|---|
| Main Input Voltage | 400 V 3 phases |
|---|---|
| Other Input Voltage | 380 V 415 V |
| Main Output Voltage | 230 V 400 V 3 phases |
| Other Output Voltage | 380 V 415 V |
| Rated power in W | 16000 W |
| Rated power in VA | 20000 VA |
| output connector type | Hard wire 4-wire (3P + E) 1 Hard wire 5-wire (3P + N + E) 1 |
| connections - terminals | 1 screw terminals |
| Battery type | External battery system |
| provided equipment | Bolt down brackets CD with software Installation guide Power modules ship installed User manual Web/SNMP management card |
| Bypass wiring configuration | 5 wire (3P + N + E) |
|---|---|
| Number of power module free slots | 0 |
| Number of power module filled slots | 0 |
| Redundant | No |
| colour | Black |
|---|---|
| Height | 82.3 cm |
| Width | 35.2 cm |
| Depth | 83.8 cm |
| Net weight | 134 kg |
| Mounting location | Front |
| Mounting preference | No preference |
| Mounting mode | Not rack-mountable |
| USB compatible | No |
| network frequency | 47...70 Hz auto-sensing |
|---|---|
| number of input connectors | 1 hard wire 5-wire (3P + N + E) |
| input voltage limits | 304...477 V |
| Maximum input current | 27 A |
| Switching current capacity | 50 A |
| Max short time withstand current | 30 kA |
| Input harmonic distortion | Less than 5 % for full load |
| Input protection type | 3-pole circuit breaker |
| Load power factor | 0.5 leading to 0.5 lagging |
| Input Power Factor at Full Load | 0.98 |
| Maximum configurable power in W | 16000 W |
|---|---|
| Harmonic distortion | Less than 5 % at full load |
| output frequency | 47...53 Hz for 50 Hz nominal sync to mains 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised |
| Crest factor | Unlimited |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| Output voltage tolerance | +/- 1% static and +/- 5% at 100% load step |
| Output harmonic distortion | < 2% for 0 to 100% linear load and < 5% for full non-linear load |
| Output overload operation | 10 minutes at 125% and 60 seconds at 150% |
| Required output current protection | 50 A |
| Neutral output current | 50 A |
| Bypass type | Built-in maintenance bypass Built-in static bypass |
| Maximum output current | 32 A |
| Maximum configurable power in VA | 20000 VA |
| product certifications | C-Tick |
|---|
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| relative humidity | 0…95 % |
| Operating altitude | 0...3333 ft |
| Ambient air temperature for storage | -35…60 °C |
| storage Relative Humidity | 0…95 % |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 54 dBA |
| Heat dissipation | 3112 Btu/h |
| IP degree of protection | IP20 |
| Efficiency | View Efficiency Graph |
|---|---|
| Number of battery filled slots | 0 |
| Number of battery free slots | 0 |
| Additional information | Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage |
| Battery power in VAH | 0 VAh runtime |
| Extended runtime | 0 |
| Free slots | 0 |
|---|---|
| Preinstalled device | Network management card with environmental monitoring - MasterPack |
| control panel | Multifunction LCD status and control console |
| Alarm | Audible and visible alarms prioritized by severity |
| Emergency power off | Yes |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 129 cm |
| Package 1 Width | 111 cm |
| Package 1 Length | 72 cm |
| Package 1 Weight | 173 kg |
| Number of Units in Package 3 | 1 |
| Warranty | 1 year on-site repair or replace with factory authorized Start-Up |
|---|
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.
SUVTP20KH is replaced by: