Browse FAQs

NetBotz 750 / 755 Motion alerts in DCE do not contain camera images

Published date: 22 May 2019


NetBotz 750 / 755 Motion alerts in DCE do not contain camera images

Product Line:

StruxureWare Data Center Expert (DCE)


NBRK0750 or NBWL0755 version 5.2 firmware NBPD0165 camera pod StruxureWare DCE 7.7


NetBotz 750 / 755 devices are discovered as SNMP devices and as such, their alerts in DCE are treated as any other SNMP device would be.


With StruxureWare DCE 7.7 and NetBotz "Botzware" (firmware) version 5.2 surveillance is enabled. If a camera motion alert is sent to DCE (or another alert configured to capture images), the images will show up in the surveillance view. If the camera is also configured for surveillance at the same time, these images will be merged by DCE. The images will not appear in the alert window of the monitoring pane the way previous NetBotz alerts would contain images.

Please note that the NetBotz 165 camera pod must be enabled for surveillance to show these images.
Please also note that the images will in no way be directly linked to the alert, you will need to search for the images based on the timeframe of the known alert.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.