Our Brands

Symmetra PX 500kW Scalable to 500kW with Maintenance Bypass Left & Distribution

SY500K500DL-PD

arrow2_down
arrow2_down

Specifications

Overview
PresentationA high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers and mission critical environments.
Lead timeUsually Ships within 6 Weeks
Main
Run time for load
W
information_circle
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 50000-500000 W
Max. Capacity Used
information_circle
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage480 V 3 phases
400 V 3 phases
Other Input Voltage415 V
Main Output Voltage480 V 3 phases
400 V 3 phases
Other Output Voltage380 V
415 V
rated power in W500000 W
rated power in VA500000 VA
output connector typeHard wire 4-wire (3P + E) 1
Hard wire 5-wire (3P + N + E) 1
battery typeVRLA
provided equipmentAssembly service
Installation guide
Network management card
Start-up service
User manual
General
bypass voltage tolerance+/- 10 % settable from +/- 4/6/8 and 10 %
Number of power module free slots0
Number of power module filled slots20
redundantYes
Physical
colourBlack
height199.1 cm
width520 cm
depth107 cm
net weight8521 kg
USB compatibleNo
Input
network frequency40...70 Hz auto-sensing
number of input connectors1 hard wire 4-wire (3P + E)
1 hard wire 5-wire (3P + N + E)
input voltage limits340...460 V 400 V
408...552 V 480 V
max short time withstand current50 kA
input harmonic distortionLess than 5 % for full load
input protection type3-pole circuit breaker
load power factor0.5 leading to 0.5 lagging
Input Power Factor at Full Load0.99
Output
Maximum configurable power in W500000 W
harmonic distortionLess than 2 %
output frequency50 Hz sync to mains
60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised
50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised
60 Hz sync to mains
UPS typeDouble conversion online
Wave typeSine wave
output voltage tolerance+/- 1% static and +/- 5% at 100% load step
output harmonic distortion< 2% linear load and < 3% non-linear load
output overload operation10 minutes at 125% and 60 seconds at 150%
bypass typeBuilt-in maintenance bypass
Built-in static bypass
efficiency96 % (in battery operation)
Maximum configurable power in VA500000 VA
Transfer time2 ms typical
Conformance
product certificationscUL listed
EUROBAT
UL listed
standardsCSA C22.2 No 107.3-05
EN/IEC 62040-1-1
EN/IEC 62040-2
EN/IEC 62040-3
OSHPD
UL 1778
UL 60950-1
Environmental
ambient air temperature for operation0…40 °C
relative humidity0…95 %
operating altitude0...3333 ft
ambient air temperature for storage-15…40 °C
storage Relative Humidity0…95 %
storage altitude0.00…15240.00 m
acoustic level54 dBA
heat dissipation61893 Btu/h
NEMA degree of protectionNEMA 1
IP degree of protectionIP20
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
EfficiencyView Efficiency Graphaction_new_window
number of battery filled slots32
number of battery free slots0
Battery recharge time3.5 h
number of battery replacement quantity6
battery overload operation10 minutes at 125% and 60 seconds at 150%
battery charger power47262 W rated
battery design life5…8 year(s)
Battery power in VAH165888 VAh runtime
battery optionSYBFXR8-8 1 207360 VAh
SYBFXR8-8 2 248832 VAh
SYBFXR8-8 3 290304 VAh
SYBFXR8-8 4 331776 VAh
extended runtime1
Communications & Management
free slots1
preinstalled deviceNetwork management card 2 with environmental monitoring, out of band access and Modbus
control panelTouch screen LCD user interface
Emergency power offOptional
Packing Units
Package 1 Weight9314 kg
Package 1 Height215 cm
Package 1 width710 cm
Package 1 Length127 cm
Contractual warranty
Warranty1 year on-site repair or replace with factory authorized Start-Up
arrow2_down

Sustainability

Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left
Resource performance

Energy efficient product

notification_ok

EU RoHS Directive

Under investigation

arrow2_down

Documents

arrow2_down

Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.