Our Brands

APC Easy UPS On-Line, 10kVA/10kW, Rackmount 6U, 230V, Hard wire 3-wire(1P+N+E) outlet, Intelligent Card Slot, LCD, Extended Runtime, W/ Rail Kit




PresentationHigh quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
Lead timeUsually Ships within 4 Weeks
Run time for load
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 1000-10000 W
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage230 V AC
415 V AC
Other Input Voltage220 V
230 V
415 V
Main Output Voltage230 V
Other Output Voltage220 V
240 V
Rated power in W10000 W
Rated power in VA10000 VA
Output connector typeHard wire 3-wire (1P + N + E) 1
Number of rack unit6U
Provided equipment1 USB cable
1 RS-232 configuration cable
2 rack mounting brackets
2 stabilization/wall mounting feet
3 jumper bar
1 external battery pack
1 battery cable
user manual
Number of power module filled slots0
Number of power module free slots0
ColourBlack (RAL 7010)
Height26.2 cm
Width43.8 cm
Depth68.0 cm
Net weight89 kg
Mounting locationFront
Mounting preferenceNo preference
Mounting modeRack-mounted
USB compatibleYes
Mounting positionHorizontal
Input voltage limits110...300 V half load
176...300 V full load
Number of input connectors1 hard wire 3-wire (1P + N + E)
1 hard wire 5-wire (3P + N + E)
Network frequency40...70 Hz auto sensing
Maximum configurable power in VA10000 VA
Maximum configurable power in W10000 W
Output frequency50/60 Hz +/- 3 Hz sync to mains
Harmonic distortion2 %
UPS typeDouble conversion online
Wave typeSine wave
Efficiency94 % (full load)
Additional informationConfigurable for 220 : 230 or 240 nominal output voltage
Bypass typeInternal bypass (automatic and manual)
Crest factor3 : 1
Product certificationsCE
StandardsEN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018
Ambient air temperature for operation0…40 °C
Relative humidity0…95 % non-condensing
Operating altitude0...3000 m
Ambient air temperature for storage-20…60 °C
Storage Relative Humidity0…95 % non-condensing
Storage altitude0…15000 m
Acoustic level60 dBA
heat dissipation2128 Btu/h
IP degree of protectionIP20
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
EfficiencyView Efficiency Graphaction_new_window
Battery typeVRLA
Battery voltage+/- 120 V
Number of battery filled slots0
Number of battery free slots0
Battery recharge time6 h
Battery charger power2340 W rated
Battery optionSRV120RLBP2-9A 1 3395 VAh
SRV120RLBP2-9A 2 5150 VAh
SRV120RLBP2-9A 3 6865 VAh
SRV120RLBP2-9A 4 8600 VAh
SRV120RLBP2-9A 5 10460 VAh
SRV120RLBP2-9A 6 12110 VAh
SRV120RLBP2-9A 7 14100 VAh
SRV120RLBP2-9A 8 15875 VAh
Communications & Management
AlarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power offYes
control panelMultifunction LCD status and control console
Surge Protection and Filtering
Surge energy rate600 J
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height62.5 cm
Package 1 Width60.0 mm
Package 1 Length90.0 cm
Package 1 Weight111 kg
Contractual warranty
Warranty2 years repair or replace


Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left

EU RoHS Directive

Under investigation




Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.