Our Brands

APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower

SC450RMI1U

You may consider below alternate product(s) that could have improved delivery lead time

battery type:

input voltage:

notification_ok
notification_ok
Environmental performance of the product Learn more

+ Lifecycle Services

arrow2_down

Description

This product is part of the Smart-UPS range, an intelligent and efficient network power protection offer from entry-level to scalable runtime. This 450VA/280W line-interactive UPS provides pure sine wave power to support critical electronics during power disruptions. The 1U rackmount SC features network grade protection, live swappable batteries, and built-in data line protection. It comes with IEC 320 C14 input, 4x IEC 320 C13 outlets and 2x IEC jumpers. The UPS has a 2-year warranty. Its dimensions are 383mm (depth) x 44mm (height) x 432mm (width) and weighs 10.18kg. Ideal for networking equipment and POS devices. It conforms to C-Tick, CE, EAC, GOST, TISI, and VDE. Designed for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages.
arrow2_down

Specifications

Overview
PresentationAPC Smart-UPS SC is ideal for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages. The Smart-UPS SC features network grade protection, hot swap batteries, and built-in data line protection for worry free uninterruptible power protection for increased availability. Built on the same standards as the award-winning Smart-UPS, Smart-UPS SC provides the basic features and manageability needed to protect entry-level applications
Lead timeUsually in Stock
Main
Run time for load
W
information_circle
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 28-280 W
Max. Capacity Used
information_circle
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage230 V
Main Output Voltage230 V
rated power in W280 W
rated power in VA450 VA
Input Connection TypeIEC 320 C14
nb of power socket outlets4 IEC 320 C13
2 IEC Jumpers
number of rack unit1U
battery typeLead-acid battery
provided equipmentUser manual
Rack mounting brackets
Smart UPS signalling RS-232 cable
CD with software
General
Number of power module filled slots0
Number of power module free slots0
product web sub-familyEntry level
redundantNo
Physical
colourGrey
height4.4 cm
width43.2 cm
depth38.3 cm
net weight10.18 kg
mounting locationFront
mounting preferenceLower
mounting modeRack-mounted
two post mountable0
USB compatibleNo
Input
input voltage limits151...302 V adjustable
195...265 V
network frequency50/60 Hz +/- 3 Hz auto-sensing
Output
harmonic distortionLess than 5 % at full load
Maximum configurable power in VA450 VA
Maximum configurable power in W280 W
Transfer time4 ms typical : 8 ms maximum
UPS typeLine interactive
Wave typeStepped approximation to a sinewave
output frequency47...53 Hz for 50 Hz nominal sync to mains
57...63 Hz for 60 Hz nominal sync to mains
Conformance
product certificationsC-Tick
CE
EAC
GOST
TISI
VDE
Environmental
acoustic level38 dBA
heat dissipation38 Btu/h
operating altitude0...10000 ft
ambient air temperature for operation0…40 °C
ambient air temperature for storage-15…45 °C
storage altitude0.00…15240.00 m
relative humidity0…95 %
storage Relative Humidity0…95 %
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
battery voltage12 V
extended runtime0
battery capacity9.0 Ah
number of battery filled slots0
number of battery free slots0
Battery recharge time5 h
number of battery replacement quantity1
battery life3…5 year(s)
Replacement batteryRBC18action_new_window
Battery power in VAH108 VAh runtime
battery charger power22 W rated
Communications & Management
alarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarm
control panelLED status display with on line : on battery : replace battery and overload indicators
Emergency power offOptional
free slots0
Surge Protection and Filtering
Data line protectionRJ11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines)
RJ45 10/100 Base-T Ethernet protection
Surge energy rate320 J
noise suppressionFull time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
Packing Units
Package 1 Weight11.73 kg
Package 1 Height16.4 cm
Package 1 width47.6 cm
Package 1 Length58.9 cm
Number of Units in Package 324
Contractual warranty
Warranty2 years repair or replace
arrow2_down

Sustainability

Green premium brand logo
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left
Resource performance

Energy efficient product

notification_ok

Take-back program available

notification_ok
Well-being performance

Mercury free

notification_ok

RoHS exemption information

REACh Regulation

EU RoHS Directive

Environmental Disclosure

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Circularity Profile

arrow2_down

Documents

arrow2_down

Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.