Browse FAQs

GSM Cards in a Netbotz appliance

Published date: 29 June 2018

Issue:

Signal query for GSM Cards in a Netbotz version 2 appliance

Product Line:

NetBotz

Environment:

NetBotz version 2 with GSM modem.

Cause:

Checking signal strength.

Resolution:



• Check the appliance log (to determine if the botz is trying to send an SMS message and if it encounters errors..)

• Go to http://ip address of the botz unit/pages/support.html,

• Choose Modem Status Page link,

• Under "SMS Modem" table,

Get Contents for

"Query" and "Signal Query".



The most common problem is that something changes on the site and blocks the GSM signal

(""Signal Query"" content should give the customers an idea).


****Note****

IF GPRS is supported, then BotzWare can utilize the GPRS signal to establish a PPP connection

 

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.