APC Smart-UPS VT 15KVA 400V w/4 Batt Mod Exp to 4, Int Maint Bypass, Parallel Capable
SUVTP15KH4B4
Discontinued on:31 December 2020
To be end-of-service on:31 December 2030
Recommended replacement(s)
Specifications
| Lead time | Special Order - Call for Quoted Lead Times |
|---|
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 1200-12000 W | |
|---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
| Main Input Voltage | 400 V 3 phases |
| Other Input Voltage | 380 V 415 V |
| Main Output Voltage | 230 V 400 V 3 phases |
| Other Output Voltage | 380 V 415 V |
| Rated power in W | 12000 W |
| Rated power in VA | 15000 VA |
| Output connector type | Hard wire 4-wire (3P + E) 1 Hard wire 5-wire (3P + N + E) 1 |
| Connections - terminals | 1 screw terminals |
| Battery type | Lead-acid battery |
| Provided equipment | Battery modules ship installed Bolt down brackets CD with software Installation guide Power modules ship installed User manual Web/SNMP management card |
| Number of power module free slots | 0 |
|---|---|
| Number of power module filled slots | 1 |
| Redundant | No |
| Colour | Black |
|---|---|
| Height | 149 cm |
| Width | 52.3 cm |
| Depth | 83.8 cm |
| Net weight | 599.09 kg |
| Mounting location | Front |
| Mounting preference | No preference |
| Mounting mode | Not rack-mountable |
| USB compatible | No |
| Network frequency | 40...70 Hz auto-sensing |
|---|---|
| Number of input connectors | 1 hard wire 5-wire (3P + N + E) |
| Input voltage limits | 304...477 V |
| Maximum input current | 21 A |
| Switching current capacity | 35 A |
| Input harmonic distortion | Less than 5 % for full load |
| Load power factor | 0.5 leading to 0.5 lagging |
| Input Power Factor at Full Load | 0.98 |
| Maximum configurable power in W | 12000 W |
|---|---|
| Harmonic distortion | Less than 5 % at full load |
| Output frequency | 47...53 Hz for 50 Hz nominal sync to mains 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised |
| Crest factor | Unlimited |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| Output overload operation | 10 minutes at 125% and 60 seconds at 150% |
| Bypass type | Built-in maintenance bypass Built-in static bypass |
| Efficiency | 95.7 % (full load) 95.2 % (half load) |
| Maximum output current | 24 A |
| Maximum configurable power in VA | 15000 VA |
| Product certifications | C-Tick CE |
|---|
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| Relative humidity | 0…95 % |
| Operating altitude | 0...3333 ft |
| Ambient air temperature for storage | -15…45 °C |
| Storage Relative Humidity | 0…95 % |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 54 dBA |
| Heat dissipation | 2170 Btu/h |
| IP degree of protection | IP20 |
| Run Time | View Runtime Graph |
|---|---|
| Efficiency | View Efficiency Graph |
| Number of battery filled slots | 4 |
| Number of battery free slots | 0 |
| Battery recharge time | 5 h |
| Number of battery replacement quantity | 4 |
| Additional information | Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage |
| Discharge battery voltage | +/- 154 V |
| Battery charger power | 1958 W rated |
| Battery power in VAH | 9810 VAh runtime |
| Battery life | 3…5 year(s) |
| Battery option | SUVTBXR2B6S 1 14715 VAh SUVTBXR6B6S 1 24664 VAh SUVTBXR6B6S 2 39551 VAh SUVTBXR6B6S 3 54382 VAh SUVTBXR6B6S 4 69446 VAh |
| Extended runtime | 1 |
| Free slots | 0 |
|---|---|
| Preinstalled device | Network management card with environmental monitoring |
| Emergency power off | Yes |
| Unit Type of Package 1 | Db |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 164.3 cm |
| Package 1 Width | 106.2 cm |
| Package 1 Length | 65 cm |
| Package 1 Weight | 630 kg |
| Number of Units in Package 3 | 1 |
| Warranty | 1 year on-site repair or replace with factory authorized Start-Up |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn moreEU RoHS Directive
Under investigation
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.
SUVTP15KH4B4 may be replaced by any of the following products: