MGE Galaxy 3500 15kVA 400V 3:1, Start-up 5X8
G35T15K3IS
Discontinued on:05 July 2021
To be end-of-service on:31 December 2030
Specifications
| Presentation | UPS is supplied without batteries. To be used with either external third party battery system, or with internal long life modular batteries (SYBTH4). |
|---|---|
| Lead time | Usually Ships within 2 Weeks |
| Main Input Voltage | 400 V 3 phases |
|---|---|
| Other Input Voltage | 380 V 415 V |
| Main Output Voltage | 230 V |
| Other Output Voltage | 220 V 240 V |
| Rated power in W | 12000 W |
| Rated power in VA | 15000 VA |
| output connector type | Hard wire 3-wire (H N + E) 1 |
| connections - terminals | 1 screw terminals |
| Battery type | External third-party batteries (not supplied) |
| provided equipment | Bolt down brackets Network management card Power modules ship installed Service manual Start-up service User manual |
| Number of power module free slots | 0 |
|---|---|
| Number of power module filled slots | 0 |
| Redundant | No |
| Height | 149.1 cm |
|---|---|
| Width | 52.3 cm |
| Depth | 83.8 cm |
| Net weight | 261 kg |
| Mounting preference | No preference |
| USB compatible | No |
| network frequency | 40...70 Hz auto-sensing |
|---|---|
| number of input connectors | 1 hard wire 5-wire (3P + N + E) |
| input voltage limits | 340...460 V adjustable 400 V 340...460 V 400 V |
| Maximum input current | 20 A |
| Switching current capacity | 25 A |
| Input harmonic distortion | Less than 5 % for full load |
| Input protection type | 3-pole circuit breaker |
| Inrush current | 200 A peak |
| Load power factor | 0.5 leading to 0.5 lagging |
| Input Power Factor at Full Load | 0.98 |
| Maximum configurable power in W | 12000 W |
|---|---|
| Harmonic distortion | Less than 5 % |
| output frequency | 47...53 Hz for 50 Hz nominal sync to mains 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised |
| Crest factor | Unlimited |
| Wave type | Sine wave |
| Output voltage tolerance | +/- 1% static and +/- 5% at 100% load step |
| Output harmonic distortion | < 2% for 0 to 100% linear load and < 5% for full non-linear load |
| Output overload operation | 10 minutes at 125% and 60 seconds at 150% |
| Required output current protection | 75 A |
| Bypass type | Built-in maintenance bypass Built-in static bypass |
| Maximum configurable power in VA | 15000 VA |
| Product certifications | CE |
|---|---|
| standards | EN 50091-2 EN/IEC 62040-3 IEC 61000-3-2 IEC 61000-3-3 ISO 14001 ISO 9001 VFI-SS-111 |
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| relative humidity | 0…95 % |
| Operating altitude | 0...3333 ft |
| Ambient air temperature for storage | 0…40 °C |
| storage Relative Humidity | 0…95 % |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 51.3 dBA |
| Heat dissipation | 1842 Btu/h |
| IP degree of protection | IP51 |
| Efficiency | View Efficiency Graph |
|---|---|
| Number of battery filled slots | 0 |
| Number of battery free slots | 0 |
| Additional information | Configurable for 220 : 230 or 240 nominal output voltage |
| Battery voltage | +/- 192 V (split battery referenced to neutral) |
| Battery overload operation | 10 minutes at 125% and 60 seconds at 150% |
| Battery power in VAH | 0 VAh runtime |
| battery option | SYBTH4 1 2765 VAh SYBTH4 2 5530 VAh SYBTH4 3 8295 VAh SYBTH4 4 11060 VAh |
| Battery graph comments | Estimated runtimes based on battery vendor data, at typical environmental conditions, with no electrical input and balanced PF = 0.8 output. |
| Extended runtime | 0 |
| Free slots | 0 |
|---|---|
| Preinstalled device | Network management card 2 with environmental monitoring |
| Control panel | Multifunction LCD status and control console |
| Alarm | Audible and visible alarms prioritized by severity |
| Emergency power off | Yes |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 164.3 cm |
| Package 1 Width | 106.2 cm |
| Package 1 Length | 65 cm |
| Package 1 Weight | 290 kg |
| Warranty | 1 year repair or replace |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn moreEU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.