Our Brands

APC Back-UPS 700VA, 230V, AVR, IEC Sockets (To be replace by BX750MI)


Environmental performance of the product Learn more


Lead timeUsually in Stock
Run time for load
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 39-390 W
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage230 V
rated power in W390 W
rated power in VA700 VA
nb of power socket outlets4 IEC 60320 C13
1 IEC Jumpers
cable length1.22 m
number of cables1
battery typeLead-acid battery
provided equipmentuser manual
product web sub-familyEntry level
Number of power module free slots0
Number of power module filled slots0
height20 cm
width11.5 cm
depth25.6 cm
net weight6 kg
mounting preferenceNo preference
mounting modeNot rack-mountable
two post mountable0
USB compatibleYes
network frequency50/60 Hz +/- 3 Hz auto-sensing
input voltage limits140...300 V
switching current capacity7 A
Maximum configurable power in W390 W
output frequency50/60 Hz +/- 1 Hz sync to mains
UPS typeLine interactive
Waveform TypeStepped approximation to a sinewave
Maximum configurable power in VA700 VA
Transfer time4 ms typical
ambient air temperature for operation0…40 °C
relative humidity0…95 % non-condensing
operating altitude0...10000 ft
ambient air temperature for storage-15…40 °C
storage Relative HumidityNon-condensing 0…95 %
storage altitude0.00…9144.00 m
acoustic level45 dBA
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
EfficiencyView Efficiency Graphaction_new_window
number of battery filled slots0
number of battery free slots0
Battery recharge time6 h
number of battery replacement quantity1
battery voltage12 V
battery capacity7.0 Ah
battery charger power14 W rated
Battery power in VAH81 VAh capacity
84 VAh runtime
battery life3…5 year(s)
Battery graph commentsThis graph is based on actual measured runtime data. All measurements were taken with new, fully charged batteries and a balanced resistive load (PF = 1.0). Actual runtimes may vary from the values of this graph. Actual runtimes are dependent on several v
extended runtime0
Communications & Management
control panelLED status display with on line : on battery : replace battery and overload indicators
alarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rate273 J
Data line protectionRJ45 modem/fax/DSL/10-100 base-T protection
Packing Units
Package 1 Weight6.5 kg
Package 1 Height27.5 cm
Package 1 width29.5 cm
Package 1 Length34 cm
Contractual warranty
Warranty2 years repair or replace


Green premium brand logo
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left
Resource performance

Energy efficient product


Take-back program available

Well-being performance

Mercury free


RoHS exemption information

REACh Regulation

EU RoHS Directive

Environmental Disclosure


The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Circularity Profile




Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.