Buscar Preguntas Frecuentes
{"searchBar":{"inputPlaceholder":"Busca por palabra clave o haz una pregunta","searchBtn":"Buscar","error":"Ingresa una palabra para buscar"}}How to Display firmware identification number on an EcoBreeze Expansion Module.
Issue:
This article explains how to Display firmware identification number on an EcoBreeze Expansion Module.
Product line:
ACEC200, ACEC201.
Environment:
All serial numbers.
Cause:
Install.
Resolution:
On switch-on, during the start-up test phase, holding the DOWN button, the project identification is displayed for about 2 seconds. The information regarding the
versions/revisions of the project is displayed in sequence. The procedure is exited automatically at the end of the start-up.
¿Te fue de ayuda?
Explora más
Explora más