{"searchBar":{"inputPlaceholder":"키워드로 검색 또는 질문","searchBtn":"검색","error":"검색할 키워드를 입력하십시오."}}
{}

브랜드

{"support":{"yesButton":"예","noButton":"아니오","feedback":{"title":"어떻게 개선할 수 있겠습니까?"},"submitButton":"제출","successMessage":"의견 주셔서 감사합니다.","title":"도움이 되었습니까?","feedbackPercentLabel":"의 사용자가 이 답변이 도움이 되었다고 응답했습니다.","captcha":{"error":"확인란을 선택하십시오"}}}
FAQ 검색

Why does PowerChute Network Shutdown not establish communications with Network Management Card when entering Radius user?

Issue:
PowerChute Network Shutdown will not establish communications with Network Management Card when Radius is enabled.

Product Line/s:
PowerChute Network Shutdown
Network Management Cards (NMC) AP9617, AP9618, AP9619, AP9630, AP9631, AP9635CH, AP9635, AP9640, AP9641

Environment:
All support OS

Cause:
Radius authentication is not supported by PowerChute Network Shutdown

Solution:
For AP9630, AP9631, AP9635 that are running firmware 6.8 and above and all AP9640, AP9641 you should enter a PowerChute user that will only be used by PCNS and the NMC for communication. PCNS and the NMC will not utilize the Radius user. Go to Configuration - Shutdown and add the PowerChute user and authentication phrase. 
 


For AP9630, AP9631, AP9635 running firmware  6.0 to 6.7.x PCNS and the NMC will not utilize the Radius user. Log into the NMC and verify the default apc user is enabled or create a new device or administrator user the PCNS and the NMC will use for communication. Then go to Configuration - Shutdown and select the PowerChute user from the User name dropdown menu. The PowerChute User Name dropdown menu is populated with local users that have Administrative or Device user privileges. 

 
For AP9630, AP9631, AP9635 running firmware earlier than 6.0 and all AP9617, AP9618, AP9619 switch the Network Card from Radius to Local Authentication Only and the PowerChute user will be the NMC administrator.
 

찾고 있는 것을 얻지 못했습니까?

다른 지원 툴로 빠른 지원을 받으십시오.