Browse FAQs

Unlicensing a Camera from NetBotz Central Results in Deletion of Associated Surveillance Pictures
Note that only unlicensing cameras can free up Surveillance license nodes .
IPMI Overview
IPMI is supported on the NetBotz 450, 455, 550, and 570 units with a 5 node monitoring pack (nbwn0006) installed ...
Data Center Expert | What virtualization environments are supported?
The full-featured demo of the virtual appliance monitors up to five device nodes and one surveillance node .
Data Center Expert | Surveillance frame rate when NetBotz communication is SSL
... have set within the Data Center Expert surveillance settings, the maximum frame rate Data Center Expert will receive from a NetBotz appliance is 5 ...
Video: How do I retrieve surveillance clips in StruxureWare Data Center Expert
Retrieving surveillance clips in StruxureWare ... NetBotz NetBotz discovered by DCE and licensed for surveillance ... assistance in retrieving NetBotz camera clips in ... ... go to the Surveillance perspective. ... thumbnails for your NetBotz Appliances that are ... If a thumbnail shows a red circle with a cross-line through it, the camera has not been licensed for surveillance . ... Clips are stored according to the NetBotz Appliance date/time, not the DCE Appliance date/time. 5 ) Within the Choose Date section, select either Relative or Date Range.
NetBotz 750 / 755 Captured clips shows duration and frame rate as per previous video capture settings
Captured clips shows duration and frame rate as per previous video capture settings on NetBotz 750 / 755 ... NetBotz 700 series ... This issue may be seen in StruxureWare Data Center Expert's surveillance data for the 700 series appliance with the issue. ... 5 . Resolve the alarm (Do not delete the alarm configuration)
Do alerts in StruxureWare DCE that come from the NetBotz 750 include images?
... come from the NetBotz 750 include images ... NetBotz 750 NetBotz 750 5. ... ... 2 and 3 NetBotz such as the NetBotz nbwl0500, nbrk0570 ... The NetBotz 750 (considered version 5 NetBotz ) is discovered ... to how the NetBotz 250 or an ... ... this article, NetBotz 750 and it's ... ... releases that support surveillance are released ( ... alerts such as door opened etc are planned to trigger surveillance capture. So although there will be no images in the alerts themselves, there should be images available in surveillance .
Data Center Expert | Discovering a NetBotz 700 Series Appliance
... to discover a NetBotz 700 series appliance ... NetBotz 750 (nbrk0750 ... NetBotz 750 (firmware ... NetBotz 200 Series NetBotz 300-500 ... ... to add a NetBotz 700 series appliance ... SNMP Monitoring and Surveillance (cameras) ... ... ) Ensure the NetBotz appliance is accessible ... ... session to the NetBotz 750 using SSH ... ... on to the NetBotz Web User Interface ... Discover NetBotz 700 Series Appliances ... ) Click on NetBotz Appliance Credentials and ... 5 ) Click Next ... are not using Surveillance Cameras on the ... Add the NetBotz 700 Series SSL ... ... to add the NetBotz Appliance SSL certificate ... ... the Device > NetBotz Appliance Communication Settings
Data Center Expert | Migrating from a Physical Appliance to a Virtual Appliance
3) Register the appliance following the instructions located within knowledge base . Note that if your previous server already has licensing on it (beyond the base 25 device nodes and 1 surveillance node ) your will need to log into your existing ... 5 ) During deployment of the trial VM, please be sure to add a second NIC card to accommodate the private LAN NIC from the hardware server and add a second hard drive to at least match the hard drive space of the hardware from which you are deploying.
Video: How do I configure APC Network Management Card network settings?
... , ap9340, NetBotz 200) ... on the CD bundled with the cards ... ... APC UPS or accessory . NetBotz 200/Environmental ... NetBotz 200/Environmental ... Press <Enter> 3- 5 times to display the username prompt ... Network Management Card 2 (ap9630, AP9631), Network Management Card 3 (ap9640, 19641)and related accessories require different configuration settings in order to be configured locally. ... Press enter 3- 5 times to display the username prompt. ... Configuration Method 5 - via Smart-UPS front panel LCD - (Supported SMT, SMX, and SRT

Results 1 - 10 of 50

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.