{"searchBar":{"inputPlaceholder":"Cerca per parola chiave o fai una domanda","searchBtn":"Cerca","error":"Inserisci una parola chiave per la ricerca"}}
{}

I nostri marchi

{"support":{"yesButton":"Sì","noButton":"No","feedback":{"title":"Aiutaci a migliorare"},"submitButton":"Invia","successMessage":"Grazie per il tuo feedback","title":"È stato utile?","feedbackPercentLabel":"di persone che lo hanno trovato utile","captcha":{"error":"Selezionare la casella"}}}
Cerca nelle Domande frequenti

A-link terminators should be used with NetBotz 750/755

Issue:
NetBotz 750/755 require A-link terminators.

Product Line:
NetBotz

Environment:
NBRK0750
NBWL0755
NetBotz 5.x

Cause:
NetBotz 750 / 755 devices as well as A-link pods and A-link sensors ship with 1 A-link terminator. The terminator is required to reduce potential data collisions on the A-link bus. A number of different issues can occur if they are not used including but not limited to incorrect readings or even lost communications with pods or sensors.

Resolution:
When using the NBRK0750 which has 2 A-link ports, the configuration should be as follows:
1: No pods - terminator in top port
2: Pods in 1 chain (either port) - terminator at end of chain. Terminator in open port
3: pods in 2 chains - terminate both chains

When using the NBWL0755, the configuration should be:
1: No Pods - No A-link terminator should be put in the A-link port.
2: Pods in chain - Terminator at end of A-link chain.
 

Non hai trovato quello che cercavi?

Per ricevere supporto tecnico, assistenza per i reclami e altro, rivolgiti al nostro team di assistenza clienti.