Our Brands

APC Back-UPS 600VA, 230V without auto shutdown software, 3 India outlets

BX600C-IN

Online stores
arrow2_down
arrow2_down

Specifications

Overview
Lead timeUsually in Stock
Main
Run time for load
W
information_circle
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 36-360 W
Max. Capacity Used
information_circle
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage230 V
Main Output Voltage230 V
rated power in W360 W
rated power in VA600 VA
nb of power socket outlets3 India 2/3-pin 6A
cable length1.22 m
number of cables1
battery typeLead-acid battery
General
provided equipmentuser manual
Number of power module free slots0
Number of power module filled slots0
redundantNo
Physical
colourBlack
height21.8 cm
width10.7 cm
depth23.7 cm
net weight4.7 kg
mounting preferenceNo preference
mounting modeNot rack-mountable
two post mountable0
USB compatibleNo
Input
network frequency45...65 Hz auto-sensing
plug standardIndia 3-pin 6A
input voltage limits145...290 V
Output
Maximum configurable power in W360 W
output frequency50 Hz sync to mains
UPS typeLine interactive
Wave typeStepped approximation to a sinewave
full load runtime360 W
Maximum configurable power in VA600 VA
Transfer time10 ms typical : 12 ms maximum
Conformance
product certificationsBIS
Environmental
ambient air temperature for operation0…40 °C
relative humidity0…95 %
operating altitude0...3000 m
ambient air temperature for storage-15…45 °C
storage Relative Humidity0…95 %
storage altitude0…15000 m
acoustic level45 dBA
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
number of battery filled slots0
number of battery free slots0
Battery recharge time6 h
number of battery replacement quantity1
battery voltage12 V
Battery power in VAH53 VAh runtime
Battery graph commentsCurve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
extended runtime0
Communications & Management
control panelLED status display with on line : on battery : replace battery and building wiring fault
alarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rate255 J
Packing Units
Package 1 Weight5.2 kg
Package 1 Height29.5 cm
Package 1 width16.5 cm
Package 1 Length31 cm
Contractual warranty
Warranty2 years repair or replace
arrow2_down

Sustainability

Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left
Resource performance

Energy efficient product

notification_ok

Take-back program available

notification_ok

REACh Regulation

EU RoHS Directive

Not compliant

arrow2_down

Documents

arrow2_down

Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.