Browse FAQs



How to connect 12 V external batteries with br1000guxi ?
1 . Remove the safety covers on the battery terminals. 2. Use the short jumper cable to connect the negative terminal on battery 1 to the positive terminal on battery 2. ... Connect the red cable to the positive terminal on battery 1 . Connect the black cable to the negative terminal on battery 2. Connect the 3 pin connector to the external battery receptacle on the rear panel of the UPS . 4. Replace the safety covers on the battery terminals
How to connect 12 V external batteries with br1500guxi ?
1 . Remove the safety covers on the battery terminals. 2. Use the short jumper cable to connect the negative terminal on battery 1 to the positive terminal on battery 2. ... Connect the red cable to the positive terminal on battery 1 . Connect the black cable to the negative terminal on battery 2. Connect the 3 pin connector to the external battery receptacle on the rear panel of the UPS . 4. Replace the safety covers on the battery terminals
Missing links to raw status information on Symmetra UPS
Links to access the raw status data of Symmetra intelligence modules are missing in the Network Management Card (NMC) interface ... Symmetra UPS systems ... Links to access the raw status information of the Symmetra intelligence modules are missing from AOS 6.4. Step 1 - Navigate to the IM information page (Status --> UPS --> Intelligence modules) Step 2 - Select "View All Battery Raw Status Data" at the bottom of the page This page will show all raw status information for the Intelligence Modules, Power Modules and any connected Battery Frames
How to set the Battery charger current in UPS SRC1KUXI ?
1 )Check what type of battery (SMF or Tubular) and Ah of battery before connecting to UPS . 2) UPS has a selection switch present at the back panel of UPS to set the charging current. 3)Charging current can be set as per the Ah rating of the connected external battery . Note: Note :Wrong selection of charging current may reduce battery life.
How many External battery pack can be connected to UPS surt10000xli ?
No of external battery connected to surt10000xli , how many external battery to surt10000xli
Total battery count in NMC interface of Symmetra UPS is off by a factor of 10
Product line: Symmetra UPS systems using ap9630/31/35 NMC, and AOS 6.4 firmware
How to set the charging current for the UPS bx1000uxi?
Charging current can be set as per the Ah rating of the connected external battery .
Whether UPS surt5000xli supports External battery or not ?
UPS surt5000xli supports External battery or not , external battery to surt5000xli
Whether UPS surt10000xli supports External battery or not ?
surt10000xli supports External battery or not, external battery connection to UPS
What is the part number of APC Smart-UPS RT 15ft Extension Cable for 192VDC External Battery Packs ?
APC Smart- UPS RT 15ft Extension Cable for 192VDC External Battery Packs : surt008


Results 1 - 10 of 50

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.