Browse FAQs



Treck TCP/IP Vulnerabilities (ripple20)
UPS Network Management Cards ... with Smart- UPS , Symmetra , Galaxy 3500, SUVT UPS , 3-phase Smart- UPS & Symmetra UPS ) ... include Smart- UPS , Symmetra , Galaxy UPS , Metered/ ... ... kBase is dedicated only to provide APC ... Smart- UPS , Symmetra , and Galaxy UPS with the following ... ... Distribution Units ( PDU ) ... 40/60kva PDU (XPDU) ... 150/175kva PDU (XRDP) Network Management Card 2 for Modular PDU /RPP (XRPD2G) ... Network Management Card 2 (NMC2) for InfraStruxure 150 kVA PDU with 84 Poles (X84P)
Whether UPS surt5000xli supports External battery or not ?
Yes, we can connect external batttery pack to this UPS and only APC manufactured battery pack SURT192XLBP can be connected.
Whether UPS surt10000xli supports External battery or not ?
Yes, we can connect external batttery pack to this UPS and only APC manufactured battery pack SURT192XLBP can be connected.
Total battery count in NMC interface of Symmetra UPS is off by a factor of 10
This is only an informational issue, and has no bearing on the function of the UPS or NMC.
Missing links to raw status information on Symmetra UPS
This page will show all raw status information for the Intelligence Modules, Power Modules and any connected Battery Frames
Video: How do I configure APC Network Management Card network settings?
... , Smart- UPS Online (SRT ... ... or AP79XX Rack PDU , Environmental Monitoring ... DHCP Only - With DHCP ... ... Next Gen Rack PDU (NMC2 only )) with ... configured for DHCP Only with no vendor ... Smart- UPS front panel LCD ... ... program, any services using the COM ... ... , the APC UPS service must be stopped ... ... with an APC UPS or accessory. ... Connect to the UPS /device serial ... Most UPS devices with a ... Rack PDU (AP78XX, ... ... Switch (ap7750 only ) Most UPS devices with a ... Rack PDU ... to return to main menu.
ap8xxx incorrect Hardware Revision number
Certain ap8xxx PDU's were manufactured with a different value in the "hardware revision" field ... A small number of rack PDU's with serial number date range before 0218 may have an incorrect hardware revision value. Typically this field shows "02", however affected PDU's can show many different values in this field. This value is cosmetic only , and is used only for reference. The hardware revision value does not impact the function of a PDU .
It is possible to enable EnergyWise on a guest Rack PDU in a NPS group?
However, only one Rack PDU , the host, will communicate to EnergyWise.
How can we do Resetting the Network Interface in AP86** model ?
Users have the option to Reboot Management Interface, Note: Rebooting the Management Interface only restarts the Rack PDU’s Network Management
APC Switched Rack PDUs - any pending outlet commands are lost when PDU Network Management Interface is rebooted
Essentially, the watchdog timer is only activated when the Rack PDU discovers it is connected to a network.


Results 1 - 10 of 50

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.