Browse FAQs



Treck TCP/IP Vulnerabilities (ripple20)
UPS Network Management Cards ... with Smart- UPS , Symmetra, ... 3500, SUVT UPS , 3-phase Smart- UPS & Symmetra UPS ) ... include Smart- UPS , Symmetra, Galaxy UPS , Metered/ ... Smart- UPS , Symmetra, and Galaxy UPS with the following ... ... Distribution Units ( PDU ) 2 G Metered/ ... ... Network Management Card 2 for InfraStruxure 40/60kva PDU (XPDU) ... Network Management Card 2 for Modular 150/175kva PDU (XRDP) ... Network Management Card 2 for Modular PDU /RPP ( ...
Video: How do I configure APC Network Management Card network settings?
... ap9340, NetBotz 200 ) ... Network Management Card 2 (NMC2) ... ... Network Management Card 2 include (but ... to): 2 G Metered/ ... , Smart- UPS Online (SRT ... ... or AP79XX Rack PDU , Environmental Monitoring ... ... Network Management Card 2 /3 ... Network Management Card 2 and 3 based ... Next Gen Rack PDU (NMC2 only ... Smart- UPS front panel LCD ... Configuration Option 2 - Terminal Emulation ... ... , the APC UPS service must be ... ... with an APC UPS or accessory. ... Connect to the UPS /device serial ... Most UPS devices with a ...
How to Install Hardwire PDU (ap7520) with any UPS ?
2 . Remove the knockout from the cover3. Connect the line, ground and neutral wires from the UPS, to the terminal
Download Language Packs for 6.4 SUMX and SY APC Network Management Card Applications
Need for alternative language packs for APC Network Management Cards installed in a UPS that uses the SUMX or SY application. ... Devices with an embedded Network Management Card 2 include (but are not limited to): 2 G Metered/Switched Rack PDUs (AP84XX, AP86XX, AP88XX, AP89XX), Certain Audio/Video Network Management Enabled products ... Firmware version 6.4, running application SUMX or SY
Video: How to check UPS firmware version of SRC2KUXI through the display.
2 . Select " UPS " option from main menu using the navigation key. 3. Press enter you will see UPS capacity in KVA and firmware version.
Missing links to raw status information on Symmetra UPS
Network Management Card 2 ... Symmetra UPS systems Step 1 - Navigate to the IM information page (Status --> UPS --> Intelligence modules) Step 2 - Select "View All Battery Raw Status Data" at the bottom of the page This page will show all raw status information for the Intelligence Modules, Power Modules and any connected Battery Frames
How to set output voltage in UPS SRC1KXLI through display ?
Kindly find the steps to configure output voltage for UPS SRC1KXLI 1.Press SELECT button to enter the UPS settings. 2 . Navigate through the parameters using SELECT button. ... 4. user selectable options are 200 , 208, 220, 230 (default), 240 Vac. ... Note:Output voltage can be set only when ups is in standby mode.
NMC Web interface reports "Someone is already logged in"
... ap9340, Netbotz 200 ) Network Management Card 2 ... Devices with an embedded Network Management Card 2 include (but are not limited to): 2 G Metered/Switched Rack PDUs (AP84XX, AP86XX, AP88XX, AP89XX), Rack Automatic Transfer Switches (AP44XX), Certain Audio/Video Network Management Enabled products, Smart- UPS Online (SRT).
Why am I receiving alerts on my network management card about "unauthorized FTP attempts" from the IP of my PRTG network monitor tool?
Product line: Devices that utilize APC network management, including but not limited to UPS's , PDU's and ATS's


Results 1 - 10 of 50

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.