Browse FAQs



Video: Data Center Expert | How do I configure the network settings?
To find the default gateway , open a command prompt > ipconfig/all > Ethernet Adapter Local Area Connection > Default Gateway .
How to apply power to AP9224111 APC Ethernet Switches?
Follow the below steps to power on AP9224111 APC Ethernet Switches :
How to apply power to ap9224110 APC Ethernet Switches?
Follow the below steps to power on ap9224110 APC Ethernet Switches :
How to apply power to AP9224112 APC Ethernet Switches?
Follow the below steps to power on AP9224112 APC Ethernet Switches :
How to reset the network timer for ATS Switch ?
... quiet for 9.5 minutes, the Rack ATS attempts to contact the Default Gateway every 4.5 minutes.
How to reset the network timer for AP4424 Switch.
... quiet for 9.5 minutes, the Rack ATS attempts to contact the Default Gateway every 4.5 minutes.
How to Connect the InfraStruXure PDU(pdrpph1000) to your network ?
1. Connect a Cat-5 network cable to the surge-protected ethernet port on the PDU user connection plate.
How to Connect the InfraStruXure PDU(pd60h5hk1) to your network ?
1. Connect a Cat-5 network cable to the surge-protected ethernet port on the PDU user connection plate.
Video: How do I configure APC Network Management Card network settings?
... the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and ...


Results 1 - 10 of 22

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.