Search FAQs
What do if there is "HOT" error code on display for Easy UPS SRV2KUXI-IN ?
Probable cause:
The temperature of the unit is rising above the set limits.
Possible Solution:
1. Disconnect non-essential equipment from the Easy-UPS to reduce the Easy-UPS load.
2. Maintain operating temperature between 0° to 40°C at full load and 40° to 50°C linearly derated to 75% of the load.
3. Do not operate UPS where there is excessive dust or where the temperature or humidity is outside specified limits.
4. Do manual restart of UPS by switching off the output, turning off the input power supply, and turning On the input and output, this should resolve the issue
In case the error persists even after trying the above troubleshooting, log the complaint.
The temperature of the unit is rising above the set limits.
Possible Solution:
1. Disconnect non-essential equipment from the Easy-UPS to reduce the Easy-UPS load.
2. Maintain operating temperature between 0° to 40°C at full load and 40° to 50°C linearly derated to 75% of the load.
3. Do not operate UPS where there is excessive dust or where the temperature or humidity is outside specified limits.
4. Do manual restart of UPS by switching off the output, turning off the input power supply, and turning On the input and output, this should resolve the issue
In case the error persists even after trying the above troubleshooting, log the complaint.
Released for:APC India
Did this answer your question?
Explore more
Product:
Explore more
Product:
