Browse FAQs

How to startup or turn the STS30 ?

Published date: 11 July 2020

Follow the below steps : 
1 - Check that the two sources are energized (voltage present).
2 - Set circuit breakers Q4  and Q6 to the ON position (position 1).
3 - Turn switch Q1BP to the ON position (position 1). 
The load is supplied by Source 1 via the bypass.
4 - Set switches Q1 and Q3  to the ON position (position 1). 
5 - Turn switch Q1BP  back to the OFF position (position 0). 
6 - Set switch Q2 to the ON position (position 1). The load is supplied by Source 1

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.