APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower
SC450RMI1U
battery type:
input voltage:
Maximum configurable power in W:
Environmental performance of the product Learn more
Specifications
| Presentation | APC Smart-UPS SC is ideal for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages. The Smart-UPS SC features network grade protection, hot swap batteries, and built-in data line protection for worry free uninterruptible power protection for increased availability. Built on the same standards as the award-winning Smart-UPS, Smart-UPS SC provides the basic features and manageability needed to protect entry-level applications |
|---|---|
| Lead time | Usually in Stock |
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 28-280 W | |
|---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
| Main Input Voltage | 230 V |
| Main Output Voltage | 230 V |
| rated power in W | 280 W |
| rated power in VA | 450 VA |
| Input Connection Type | IEC 320 C14 |
| nb of power socket outlets | 4 IEC 320 C13 2 IEC Jumpers |
| number of rack unit | 1U |
| battery type | Lead-acid battery |
| provided equipment | User manual Rack mounting brackets Smart UPS signalling RS-232 cable CD with software |
| Number of power module filled slots | 0 |
|---|---|
| Number of power module free slots | 0 |
| product web sub-family | Entry level |
| redundant | No |
| colour | Grey |
|---|---|
| height | 4.4 cm |
| width | 43.2 cm |
| depth | 38.3 cm |
| net weight | 10.18 kg |
| mounting location | Front |
| mounting preference | Lower |
| mounting mode | Rack-mounted |
| two post mountable | 0 |
| USB compatible | No |
| input voltage limits | 151...302 V adjustable 195...265 V |
|---|---|
| network frequency | 50/60 Hz +/- 3 Hz auto-sensing |
| harmonic distortion | Less than 5 % at full load |
|---|---|
| Maximum configurable power in VA | 450 VA |
| Maximum configurable power in W | 280 W |
| Transfer time | 4 ms typical : 8 ms maximum |
| UPS type | Line interactive |
| Wave type | Stepped approximation to a sinewave |
| output frequency | 47...53 Hz for 50 Hz nominal sync to mains 57...63 Hz for 60 Hz nominal sync to mains |
| product certifications | C-Tick CE EAC GOST TISI VDE |
|---|
| acoustic level | 38 dBA |
|---|---|
| heat dissipation | 38 Btu/h |
| operating altitude | 0...10000 ft |
| ambient air temperature for operation | 0…40 °C |
| ambient air temperature for storage | -15…45 °C |
| storage altitude | 0.00…15240.00 m |
| relative humidity | 0…95 % |
| storage Relative Humidity | 0…95 % |
| Run Time | View Runtime Graph |
|---|---|
| battery voltage | 12 V |
| extended runtime | 0 |
| battery capacity | 9.0 Ah |
| number of battery filled slots | 0 |
| number of battery free slots | 0 |
| Battery recharge time | 5 h |
| number of battery replacement quantity | 1 |
| battery life | 3…5 year(s) |
| Battery power in VAH | 108 VAh runtime |
| battery charger power | 22 W rated |
| alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
|---|---|
| control panel | LED status display with on line : on battery : replace battery and overload indicators |
| Emergency power off | Optional |
| free slots | 0 |
| Data line protection | RJ11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines) RJ45 10/100 Base-T Ethernet protection |
|---|---|
| Surge energy rate | 320 J |
| noise suppression | Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Package 1 Weight | 11.73 kg |
|---|---|
| Package 1 Height | 16.4 cm |
| Package 1 width | 47.6 cm |
| Package 1 Length | 58.9 cm |
| Number of Units in Package 3 | 24 |
| Warranty | 2 years repair or replace |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn moreResource performance
Energy efficient product
Take-back program available
Well-being performance
Mercury free
RoHS exemption information
REACh Regulation
EU RoHS Directive
Compliant
Environmental Disclosure
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Circularity Profile
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.