

APC Smart-UPS VT 15kVA 400V w/4 Batt Mod, Start-Up 5X8, Int Maint Bypass, Parallel Capable
SUVTP15KH4B4S
Discontinued on:05 July 2021
To be end-of-service on:31 December 2030
Recommended replacement(s)
Environmental performance of the product Learn more
Sustainable by Design
Specifications
Lead time | Usually Ships within 2 Weeks |
---|
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 1200-12000 W | |
---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
Main Input Voltage | 400 V 3 phases |
Other Input Voltage | 380 V 415 V |
Main Output Voltage | 400 V 3 phases |
Other Output Voltage | 380 V 415 V |
Rated power in W | 12000 W |
Rated power in VA | 15000 VA |
Output connector type | Hard wire 4-wire (3P + E) 1 Hard wire 5-wire (3P + N + E) 1 |
Connections - terminals | 1 screw terminals |
Battery type | VRLA |
Provided equipment | Battery modules ship installed CD with software Network management card Power modules ship installed User manual Bolt down brackets Installation guide Start up included |
Number of power module free slots | 0 |
---|---|
Number of power module filled slots | 0 |
Redundant | No |
Colour | Black |
---|---|
Height | 149 cm |
Width | 52.3 cm |
Depth | 84.2 cm |
Net weight | 599.09 kg |
Mounting location | Front |
Mounting preference | No preference |
Mounting mode | Not rack-mountable |
Two post mountable | 0 |
USB compatible | No |
Network frequency | 40...70 Hz auto-sensing |
---|---|
Number of input connectors | 1 hard wire 5-wire (3P + N + E) |
Input voltage limits | 304...477 V |
Maximum input current | 21 A |
Switching current capacity | 35 A |
Input Power Factor at Full Load | 0.98 |
Maximum configurable power in W | 12000 W |
---|---|
Harmonic distortion | Less than 5 % at full load |
Output frequency | 47...53 Hz for 50 Hz nominal sync to mains 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised |
Crest factor | 3 : 1 |
UPS type | Double conversion online |
Wave type | Sine wave |
Bypass type | Built-in maintenance bypass Built-in static bypass |
Maximum output current | 24 A |
Maximum configurable power in VA | 15000 VA |
Product certifications | C-Tick CE RCM |
---|
Ambient air temperature for operation | 0…40 °C |
---|---|
Relative humidity | 0…95 % |
Operating altitude | 0...3333 ft |
Ambient air temperature for storage | -50…40 °C |
Storage Relative Humidity | 0…95 % |
Storage altitude | 0.00…15240.00 m |
Acoustic level | 51.3 dBA |
Heat dissipation | 2170 Btu/h |
IP degree of protection | IP20 |
Run Time | View Runtime Graph |
---|---|
Efficiency | View Efficiency Graph |
Number of battery filled slots | 4 |
Number of battery free slots | 0 |
Battery recharge time | 5 h |
Number of battery replacement quantity | 4 |
Additional information | Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage |
Battery voltage | +/- 192 V (split battery referenced to neutral) |
Discharge battery voltage | +/- 154 V |
Battery charger power | 1958 W rated |
Battery power in VAH | 9810 VAh runtime |
Battery life | 3…5 year(s) |
Battery option | SUVTXR2B6S 1 14715 VAh SUVTXR6B6S 1 24664 VAh SUVTXR6B6S 2 39551 VAh SUVTXR6B6S 3 54382 VAh SUVTXR6B6S 4 69446 VAh |
Battery graph comments | Estimated runtimes based on battery vendor data, at typical environmental conditions, with no electrical input and balanced PF = 0.8 output. |
Extended runtime | 1 |
Free slots | 0 |
---|---|
Preinstalled device | Network management card 2 with environmental monitoring |
Emergency power off | Yes |
Unit Type of Package 1 | Db |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 164.3 cm |
Package 1 Width | 106.2 cm |
Package 1 Length | 65 cm |
Package 1 Weight | 630 kg |
Number of Units in Package 3 | 1 |
Warranty | 1 year repair or replace, Start-Up Service |
---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn more
Resource performance
Take-back program available
Well-being performance
Mercury free
Certifications & Standards
REACh Regulation
EU RoHS Directive
Environmental Disclosure
Circularity Profile
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.
SUVTP15KH4B4S is replaced by: