Search FAQs
{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}Video: How to change the Maintenance Intervals on a Network Air FM unit
Issue:
This document contains a video on how to change the Maintenance Intervals on a Network Air FM unit.
Product line:
FM35-50, ACFM, IR40.
Environment:
All Serial Numbers.
Cause:
Install Operation.
Resolution:
How to change the Maintenance Intervals on a Network Air FM unit follow the below procedures.
1 Press ESC until you reach the main menu (On/Off).
2 Scroll to SETUP and press ENTER.
3 Scroll to SYSTEM 1 and press ENTER.
4 Press ENTER on ALARMS.
5 Press ENTER on MAINT ALARMS.
6 Press ENTER to scroll through the device available.
1 of 7 Compressors 1
2of 7 Compressor 2
3 of 7 Heaters
4 of 7 Blowers 1
5 of 7 Blowers 2
6 of 7 VFD 1
7 of 7 VFD 2
7 Press ENTER on the selected device.
8 Press the DOWN arrow once then press ENTER again.
9 Using the UP or DOWN arrows you can select the desired interval or disable this feature.
This document contains a video on how to change the Maintenance Intervals on a Network Air FM unit.
Product line:
FM35-50, ACFM, IR40.
Environment:
All Serial Numbers.
Cause:
Install Operation.
Resolution:
How to change the Maintenance Intervals on a Network Air FM unit follow the below procedures.
1 Press ESC until you reach the main menu (On/Off).
2 Scroll to SETUP and press ENTER.
3 Scroll to SYSTEM 1 and press ENTER.
4 Press ENTER on ALARMS.
5 Press ENTER on MAINT ALARMS.
6 Press ENTER to scroll through the device available.
1 of 7 Compressors 1
2of 7 Compressor 2
3 of 7 Heaters
4 of 7 Blowers 1
5 of 7 Blowers 2
6 of 7 VFD 1
7 of 7 VFD 2
7 Press ENTER on the selected device.
8 Press the DOWN arrow once then press ENTER again.
9 Using the UP or DOWN arrows you can select the desired interval or disable this feature.
Published for:APC Hong Kong
Did this answer your question?
Explore more
Explore more
