Browse FAQs



Do the NetShelter 2-post or 4-post racks have castor kits available?
If an a open frame rack design with castors is required please consider ar3100x617. This is a NetShelter SX with no sides or doors .
ACSC1XX Spare Parts List
1 1 1 1 ... TEMPERATURE SENSORS ( Rack Inlet) 1 ... -230/ 1 /60 ( ... ... -240/ 1 /50 ( ... ... -230/ 1 /60, ... 1 ... -240/ 1 /50 SC ... 1 ... PUMP DUAL ASSY W /HOSES ( ... 1 1 Door Key - Spare ... 1 1 1 1 ... WASHABLE IR SERIES 1 /2" ... FITTING 1 /8" ... FITTING 1 /8" ... 1 ... BULKHEAD MOUNT ( single float) 1 1 Front Door Assembly - Spare ... 1
What spare parts are available for my NetShelter SX, VX, WX, AV, SV, Colocation, EP, ES, VS, 2-Post Rack, 4-Post Rack?
... ep, vs, ar500, ar1000, ar2800, door , doors , front, rear, roof, side , panel, ar2100blk ...
Can the side doors or rear fan panels of the NetShelter CX/CX2 be secured with the NetBotz HID door handle? If not, is there a more secure option?
Issue: I customer is looking to make the side door more secure, thus making access to the rear fan panels more secure.
Can a NetBotz Door Switch Sensor be installed onto NetShelter SX with RACS?
There are no holes in the Rack Air Containment frame (front or rear) for the NetBotz Door Switch Sensor install onto. ... The frame of the Rack Air Containment does not include the pre-drilled holes for NetBotz that the NetShelter SX does. ... The NetBotz Door Switch Sensors can be installed using the included 2- sided tape.
acdc1010 Hot Aisle Containment Rack Expansion Bundle Kit Installation (Manual)
... Hot Aisle Containment Rack Expansion Bundle Kit ... ... Install, A Rack Expansion Bundle Kit ... complete set of racks , joining brackets ... A Rack Expansion Bundle Kit ... complete set of racks , joining brackets ... 1 . Never work ... ... correctly install your Rack Expansion Bundle Kit ... Door and Door Frame Removal The door frame is heavy ... ... you reinstall the door and door frame. ... to remove the door frame assembly from ... ... Before attaching new racks to an existing ... ... to install a Rack Expansion Bundle Kit ... 1 . Remove the rear doors of the enclosures ... ... Remove the rear doors of the enclosures ...
Is there a NetShelter Accessory Compatibility Chart for the discontinued NetShelter VX and VS cabinets?
side , door , roof, fan, bracket, ar2100, ar2800, ar2101, ar2102, ar2103, ar2104, ar2105, ar2310 ...
What are your condenser clearances and placement requirements?
Walls or Obstructions For proper air flow and access all sides of the unit should be a minimum of “ W ” away from any wall or obstruction. ... Care should be taken to see that ample room is left for maintenance work through access doors and panels.
ACRP1XX, ACRD5XX, ACRP5XX, and ACRC5XX Parts List
... 0521 ADPTR ELBOW 1 /2 INCH ... ... 61194 ADPTR STRAIGHT 1 /2 INCH - 1 /2 INCH ... ... 0991 ADPTR STRAIGHT 1 /2 INCH ... ... CABLE ATS # 1 200-240v ... CABLE ATS # 1 480v 0w3122 CABLE ... ... 13 FT ( RACK INLET ... HEATER ASSY # 1 w0m-9895 ELBOW ADPTR REDUCTION 1 /2 INCH ... ... Couplings FTG PEX 1 "NPT with ... ... FLOW METER - 1 " (body ... HUMIDIFIER COMPACT 1 -3 KG ... HUMIDIFIER COMPACT 1 -3 KG ... ... VALVE SLND CAREL 1 - 1 /4 IN


Results 1 - 10 of 50

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.

Contact support