Our Brands

APC Smart-UPS On-Line, 10kVA/10kW, Rack/Tower, 230V, 2x IEC C13+1x IEC C19+Hard wire 3-wire (H+N+E) outlets, Network Card, W/O rail kit


battery type:

input voltage:


Compatible Software

+ Lifecycle Services



Lead timeUsually in Stock
Run time for load
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 1000-10000 W
Max. Capacity Used
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage230 V
Other Input Voltage220 V
240 V
Main Output Voltage230 V
Other Output Voltage220 V
240 V
rated power in W10000 W
rated power in VA10000 VA
nb of power socket outlets2 IEC 60320 C13
1 IEC 60320 C19
output connector typeHard wire 3-wire (H N + E) 1
battery typeLead-acid battery
provided equipmentSmart UPS signalling RS-232 cable
User manual
Number of power module free slots0
Number of power module filled slots0
height21.7 cm
width44 cm
depth68 cm
net weight101.44 kg
mounting preferenceNo preference
mounting modeRack-mounted with kit
two post mountable0
USB compatibleNo
network frequency40...70 Hz auto-sensing
number of input connectors1 hard wire 3-wire (1P + N + E)
input voltage limits160...285 V
maximum input current30 A
max short time withstand current40 kA
Maximum configurable power in W10000 W
harmonic distortionLess than 2 %
output frequency50/60 Hz +/- 3 Hz sync to mains
crest factor3 : 1
UPS typeDouble conversion online
Wave typeSine wave
bypass typeInternal bypass (automatic and manual)
full load runtime00:03:30 10000 W
half load runtime00:11:00 5000 W
Maximum configurable power in VA10000 VA
ambient air temperature for operation0…40 °C
relative humidity0…95 % non-condensing
operating altitude0...6600 ft
ambient air temperature for storage-15…45 °C
storage Relative Humidity0…95 % Non-condensing
storage altitude0.00…15240.00 m
acoustic level55 dB
heat dissipation2217.98 Btu/h
IP degree of protectionIP20
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
EfficiencyView Efficiency Graphaction_new_window
number of battery filled slots0
number of battery free slots0
Battery recharge time4 h
additional informationConfigurable for 220 : 230 or 240 nominal output voltage
battery voltage+/- 96 V
battery charger power431 W rated
Battery power in VAH1772 VAh runtime
battery life3…5 year(s)
battery optionSRTG192XLBP4 1 3564 VAh
SRTG192XLBP4 2 5415 VAh
SRTG192XLBP4 3 7378 VAh
SRTG192XLBP4 4 9216 VAh
extended runtime1
Communications & Management
preinstalled deviceNetwork management card 3 with environmental monitoring
control panelLED Status display with on line : on battery
Multifunction LCD status and control console
alarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power offYes
Surge Protection and Filtering
Surge energy rate600 J
Packing Units
Package 1 Weight103.46 kg
Package 1 Height41.4 cm
Package 1 width59 cm
Package 1 Length79 cm


Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left

EU RoHS Directive

Under investigation


The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins




Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.