Which accessories/environmental sensors are compatible with my APC Network Management Card (or devices with embedded Network Management Cards)?
Which accessories or environmental sensors are compatible with my Network Management Card (or devices with embedded Network Management Cards)?
- Network Management Card 1 - AP9617, AP9618, AP9619
Devices with an embedded Network Management Card 1 include (but are not limited to): Metered/Switched Rack PDUs (AP78XX, AP79XX), Rack Automatic Transfer Switches.
- Network Management Card 2 - AP9630/AP9630CH, AP9631/AP9631CH, AP9635/35CH
Devices with an embedded Network Management Card 2 include (but are not limited to): 2G Metered/Switched Rack PDUs (AP86XX, AP88XX, AP89XX), Rack Automatic Transfer Switches (AP44XX), Smart-UPS Online (with model prefix SRT).
- Network Management Card 3 - AP9640, AP9641
- All serial numbers
- All installation scenarios
- All firmware versions (unless otherwise noted)
- Compatibility excludes NetBotz devices
General compatibility information relating to supported accessories that can be connected to the "Sensor" or "Universal Input/Output (UIO)" ports. Please note, compatibility excludes NetBotz branded items that contain an onboard Network Management Card, such as NetBotz 200. Please refer to NetBotz sensor compatibility information.
Refer to the table below.
|Device/Available UIO Ports||Quantity of Accessory Ports/Type||Firmware Application Name||Accessories/Sensors Supported|
|AP9630 or AP9630CH||0||Any|| |
|AP9631 or AP9631CH||2/UIO||Any|| |
|AP8XXX series Rack PDU||1/UIO|
|AP7XXX series Rack PDU||0||rpdu|| |
|AP9635 or AP9635CH||1/UIO||Any, sypx - v5.1.3 or higher required|| |
|AP9618, AP9619||1/Sensor||Any|| |
|AP77XX Rack ATS||0||ats, g2ats|| |
|AP44XX Rack ATS||0||ats4g|| |
|Smart-UPS Online (with model pre-fix SRT, available mid-late 2014)||1, integrated UIO||sumx|| |
Released for:APC Egypt
Did this answer your question?