Smart-UPS VT-G3500; Load does not turn on automatically after an outage/shutdown
Load does not turn on automatically after an outage/shutdown
Smart-UPS VT-Galaxy 3500
All Product models, all serial numbers
The system is set to not auto start by default
You can set the load to turn on automatically after an outage from the PowerView display.
1. Go to Setup menu
2: Select System
3: Select Auto Start
4. Change value to On
This may take one reboot of the UPS to take affect, and you will need to turn on the load manually then. After that first reboot it should automatically turn on in the future.
Released for:APC Estonia
Did this answer your question?