Provides power to a device at a maximum of 10 A. Activates a connected device when configured events occur. (For example, a fan may be connected to this outlet, and the outlet may be configured to turn on when a high threshold violation occurs for a temperature sensor.)
3
Wireless Sensor Network
USB port with NetBotz USB Coordinator (NBWC100U) installed. Used with included Wireless Temperature Sensor (NBWS100T) to monitor temperature. Additional wireless sensors can be purchased separately.
4
Rack Access Ports
Ports for the door switch sensors on doors #1 and #2.
Ports for the handle sensors (NBHN125 or NBHN1356) on doors #1 and #2.
5
Beacon Port
Used for connecting an alarm beacon (AP9324).
6
Universal Sensor ports
Used to connect APC by Schneider Electric sensors and third-party dry contact sensors. Third-party dry contact sensors require a Dry Contact Cable (NBES0304).
7
USB Port
Used to connect USB devices to the appliance.
8
Voltage Output
Provides 12 Vdc or 24 Vdc (75mA) to a connected device.
Relay Output
Used for connecting relay-controlled external devices.
9
10/100 Network Port
Provides the connection to the network. Status and link Light-emitting Diodes (LEDs) indicate network traffic. See Link LED and Status LED for additional information.
10
A-Link Ports
Used to cascade NetBotz Rack Sensor Pod 150s (NBPD0150), or connect Temperature/Humidity Sensors with Digital Display (AP9520TH). Provides communications and power using standard CAT-5 cabling with straight-through wiring. NOTE: To cascade multiple devices, connect a supplemental power supply (100-240 Vac/24 Vdc, part number AP9505i) to a NetBotz Rack Sensor Pod 150.
11
Modbus RS-485 port
Provides the connection to a building management system using the Modbus protocol.
12
Console Port
Used to connect the USB A-USB mini B configuration cable, when configuring initial network settings. NOTE: See knowledge base FA381239 for instructions on configuring the network settings (TCP/IP) and knowledge base FA381275 for instructions on installing the required FTDI VCP driver.
13
Power LED
Indicates whether the unit is receiving power (blue = receiving power; dark = not receiving power).
14
Reset button
Restarts the Rack Monitor 250 network management interface.
Nicht gefunden, was Sie suchen?
Wenden Sie sich an unser Kundenteam, um Informationen zum technischen Support, Unterstützung bei Beschwerden und vieles mehr zu erhalten.
