NetBotz v3 | Security Information

Issue:
NetBotz v3 Appliance Security Information

Product Line:
NetBotz v3 (355,450, 455, 550, & 570)

Environment:
NetBotz (all firmware versions)

Resolution:

Network Protocols and Ports

Protocol	Transfer Protocol	Port(s)	Disposition	Network	Credentials/Access	Encryption	Comments
FTP	TCP	21	Outbound - Not configured by default	FTP traffic from the NetBotz depends on alarm policy configuration and number of alarms.	As specified in the FTP remote server settings	Not supported by FTP
Telnet	TCP	23	Disabled by default	Network requirements are low based on user input.		Not supported by telnet.	Should only be open temporarily for support reasons.
SMTP	TCP	25	Outbound - Not configured by default	Network requirements are low. Email traffic from the NetBotz depends on alarm policy configuration and number of alarms occurring.	As specified in email settings.	Requires STARTTLS extension	Communication with email server
DNS	UDP	53	Outbound - Not configured by default	Very limited traffic and bandwidth requirement	As specified in external system configuration	Not supported	DNS server communication
DHCP Client	UDP	68	Outbound - Enabled only when DHCP IP address acquisition is enabled	Very limited traffic and bandwidth requirement	No credentials available	Not supported by DHCP
HTTP	TCP (SSL)	80 (443)	Inbound (default)	Network speed of minimum 100Mbps is recommended. Bandwidth usage between client and server heavily depends on number of discovered devices, alarm configuration and operations carried out in the client e.g. report generation.	Manual created user and password (default apc/apc) Authentication server integration support. There is no option to reset client user password. Password policy is not implemented in NetBotz. The password consists of ASCII characters.	Server and client negotiate SSL cipher type and key length	Communication from NetBotz Appliances / DCE Console / Web API and 3rd party integrations.
NFS	TCP/UDP	111		Depending on system integration	As specified in external system configuration	Not supported by protocol	NFS mounted external drive
NTP	TCP	123		Very limited traffic and bandwidth requirement	As specified in time settings	Depending on system integration	NTP server communication
SMB	TCP/UDP	139		Depending on system integration	As specified in system storage settings	Depending on system integration	SMB communication to NAS/SAN
SNMP	UDP	161	Inbound / Outbound - Enabled by default	The bandwidth needed heavily depends on number of discovered devices, polling interval configured and alarm activity in the system.	Specified in device SNMP configuration. Default community string: public	SNMPv3 offer encryption as configured	Change the default community strings and avoid SNMPv1 when possible
SNMP (Trap)	UDP	162		The bandwidth requirement needed heavily depends on number of discovered devices, polling interval configured, and alarm activity in the system.	Specified in device SNMP configuration	SNMPv3 offers encryption as configured	SNMP Communication between discovered devices and DCE
CIFS	TCP	445		Depending on system integration	As specified in external system configuration	Depending on system integration	CIFS communication to NAS/SAN
ModbusTCP	TCP	502		The bandwidth needed heavily depends on number of discovered devices, polling interval configured, and alarm activity in the system.	Not supported by ModbusTCP	Not supported by ModbusTCP	ModbusTCP Communication from Modbus Device/Gateway
Rsyslog	UDP	514	Disabled by default	Depends on configuration	Not supported by rsyslog	Not supported by rsyslog
Socks		1080	Disabled by default	Depends on traffic over HTTP and HTTPS ports	As specified by the Socks proxy server
NFS	TCP/UDP	2049		Depending on system integration	As specified in external system configuration	Not supported by protocol	NFS communication to NAS/SAN

Firewall Configuration
- NetBotz includes an IP Filtering feature.  Configure IP Filtering in Advanced View.

Cybersecurity Considerations
- Where possible, all unnecessary services should be disabled (SNMP, HTTP, etc.).
- Use Strong encryption (AES for SNMPv3, HTTPS, etc.).
- Change the default password and use passwords that are considered strong.
- If SNMP is required, consider changing the V1 community strings, and do not user SNMPv1 thereafter.  Use SNMPv3 instead, configured with SHA and AES-128.

Publicado para:APC Colombia