Consulter la FAQ
Default password of 1234 does not work on the Display of new Galax VX or Galaxy VM.
Serial port setting: for 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.
How to take the Single Galaxy 5000 UPS from normal operation to total power off using an external Maintenance Bypass Panel
... to take the Single Galaxy 5000 UPS from ... Galaxy 5000, Galaxy 5500 ... Powering Down the Galaxy 5000 UPS This procedure is for a single UPS with an external maintenance bypass panel. ... Step 1 : Touch any button on the display to wake it up. ... Step 5 : Press the Inverter OFF (gray) button for 3 seconds to transfer the load to the Static Bypass Switch. ... Step 8 : Unlock CB2, remove the key, and place it in the key interlock. ... Turn off Q 1 Switch
Information regarding the Aluminum cable for the Galaxy VX products
Issue: Information regarding the Aluminum cable for the Galaxy VX products.
Where can I find Modbus Register map for Galaxy VX UPS products
Issue: Where can I find Modbus Register map for Galaxy VX UPS products
Where can I find Modbus Register map for Galaxy VX UPS products
Issue: Where can I find Modbus Register map for Galaxy VX UPS products
Where do I find an Operation Manual for Galaxy VX Series UPS?
Issue: Operation Manual for Galaxy VX Series
Galaxy VX; SBC Magelis 10-inch display will not accept firmware upload
Product line: Parallel Galaxy VX with Magelis 10-inch display.
Video: How to wire the Modbus Connector used on AP9635, Galaxy VM and VX products
Product line: AP9635, Galaxy VM, Galaxy VX
Why is the Galaxy VX 10-inch display alarming when ODBX breaker is closed instead of alarming in an open state?
Product line: Parallel Galaxy VX with Magelis 10-inch display.