{"searchBar":{"inputPlaceholder":"Rechercher par mot-clé ou poser une question","searchBtn":"Rechercher","error":"Veuillez saisir un mot-clé pour effectuer une recherche"}}
{}

Nos marques

{"support":{"yesButton":"Oui","noButton":"Non","feedback":{"title":"Quelles améliorations pouvons-nous apporter ?"},"submitButton":"Soumettre","successMessage":"Merci de nous avoir fait part de vos commentaires.","title":"Cela vous a-t-il été utile ?","feedbackPercentLabel":"personnes ont trouvé cela utile","captcha":{"error":"Veuillez cocher la case appropriée."}}}
Consulter notre FAQ

NetBotz 250 | Inaccurate Data Logs (prior to v6.4.6 firmware)

Issue:
On the NetBotz 250, temperature and humidity readings may show inaccurate readings in the data log, even though the correct readings are shown on the Status screen.

Product Line:
NetBotz 250

Environment:
NetBotz 250 (prior to v6.4.6)

Resolution:

This was a known issue that occurs with firmware prior to v6.4.6.  Starting with firmware version 6.4.6 the wired sensor temperature values reported through the data log (Logs > Data > Log, Logs > Data > Graphing) and temperatures reported through the status page (Status > Wired Sensor > Temperature & Humidity) or the configuration page (Configuration > Device > Wired Sensor > Temperature & Humidity) now report the same value if updated at the same time.

The latest firmware version can be found at the link below under the Software & Firmware section:
https://www.apc.com/shop/us/en/products/NetBotz-Rack-Monitor-250/P-NBRK0250

Vous ne trouvez pas ce que vous recherchez ?

Contactez notre service client local si vous avez des questions ou si vous avez besoin de plus de détails ou d'une assistance technique.