{"support":{"yesButton":"Oui","noButton":"Non","feedback":{"title":"Quelles améliorations pouvons-nous apporter ?"},"submitButton":"Soumettre","successMessage":"Merci de nous avoir fait part de vos commentaires.","title":"Cela vous a-t-il été utile ?","feedbackPercentLabel":"personnes ont trouvé cela utile","captcha":{"error":"Veuillez cocher la case appropriée."}}}Consulter notre FAQ
{"searchBar":{"inputPlaceholder":"Rechercher par mot-clé ou poser une question","searchBtn":"Rechercher","error":"Veuillez saisir un mot-clé pour effectuer une recherche"}}How to configure NetBotz version 2 external sensors?
Issue:
Netbotz External Sensor Installation Tips
Product Line:
Netbotz
Environment:
NetBotz 2.x
Cause:
Configuration tips.
Resolution:
Adding sensors that connect to the external sensor ports require configuration before they will function. Follow these basic guidelines when adding sensors to the external sensor ports:
Netbotz External Sensor Installation Tips
Product Line:
Netbotz
Environment:
NetBotz 2.x
Cause:
Configuration tips.
Resolution:
Adding sensors that connect to the external sensor ports require configuration before they will function. Follow these basic guidelines when adding sensors to the external sensor ports:
- Physically connect the add-on sensor using and noting the external sensor port(s)
- Under “Configuration” in the Advanced View, click on “Sensor Pods”. Select the appropriate Sensor Pod where you attached the sensor
- Click “External Ports” and select the appropriate sensor and the port that it’s plugged into, then name it appropriately
- Once that’s done, you can then select the “Sensors” button and edit the thresholds for that device accordingly
- It’s always a good idea to test the sensors and cabling before fully deploying the solution on-site.
En savoir plus
En savoir plus
Vous ne trouvez pas ce que vous recherchez ?
Contactez notre service client local si vous avez des questions ou si vous avez besoin de plus de détails ou d'une assistance technique.