Технические часто задаваемые вопросы
Video: How to take the Galaxy 5000 UPS from total power off to normal operation.
Transitioning the Galaxy 5000 UPS from total power ... Galaxy 5000 , Galaxy 5500 For various reasons, the Galaxy 5000 may be in ... ... This is not for commissioning a new UPS . ... of a new UPS must be performed ... ... to restore the Galaxy 5000 UPS from total power ... ... This procedure is for a single UPS without an external ... ... end of the UPS initialization with PFC start-up . ... : Choose “ Start the UPS ” Step 5 : Turn the ... Step 8 : Set the ... ... Green “Inverter Start Button” The Inverter Assumes the load, and the UPS is normal operation with the load protected.
Where can I get support for APC and MGE Products?
For support on APC ... AIS 5000 Assessment Services ... Back-UPS XS Battery Replacement Services Charge- UPS EX InfraStruxure for Large Data Centers InfraStruxure for Medium Data Centers InfraStruxure for Server Rooms InfraStruxure for Small Data Centers InfraStruxure for Wiring Closets Installation Services Magnum XS Magnum XS Rectifier Matrix- UPS Matrix- UPS Accessories MGE Galaxy MGE Galaxy 300 MGE Galaxy 3000 MGE Galaxy 3500 MGE Galaxy 4000 MGE Galaxy 5000 MGE Galaxy 5500 MGE Galaxy 6000 MGE Galaxy 7000 MGE Galaxy 9000 MGE Galaxy PW MGE Service Bypass MGE UPS 4000 Network Integration Services On Site Service
APC UPS Network Management Card (NMC) Compatibility Chart
The AP9644 card is backward compatible with any Galaxy VS already installed. When the card is installed after the UPS , however, a new Start-up service (WSTRTUP-VS1-a50) needs to be purchased to upgrade the UPS and the card at the customer site.
Information for Noise level of UPS Galaxy 5000 NAM
UPS rating ( kVA ) 40 /50/60/80kva 100/130kva Noise level on a normal floor (dBA) with ...
DAC, Cancoil Installation Manual
The control system must be adjusted at start-up for proper operation. No further seasonal adjustment is required after this.
How to take the Single Galaxy 5000 UPS from normal operation to total power off using an external Maintenance Bypass Panel
... take the Single Galaxy 5000 UPS from normal operation ... Galaxy 5000 , Galaxy 5500 ... request come in for assistance with Powering Down the Galaxy 5000 UPS ... power down the UPS are available on ... ... This procedure is for a single UPS with an external ... ... to wake it up . ... “Stop the UPS ” Step 5 : Press the ... gray) button for 3 seconds to ... ... protected by the UPS . Step 8 : Unlock CB2 ... The UPS is now fully ... Step 11: Open the UPS door. ... There is still stored energy in the capacitors, and batteries inside the UPS . Never remove any covers or panels.
Matrix-UPS emits a chirping sound after being on-battery or running a self-test
... pack fails a UPS On-Battery ... scheduled or through UPS start-up ), the Matrix- UPS will emit chirps for an interval of ...
Video: How to Start your Symmetra PX 250/500 UPS
px250-500, Odin, operation, start-up , video
SRT 8 or 10kva reports Error P.11 or DC Bus Soft Start or event codes 124/125
4. Improved system handling for certain AC input conditions during system start-up .
SRT 8 or 10kva experiences excessive battery transfer and re-transfer events in 3 phase systems
4. Improved system handling for certain AC input conditions during system start-up .