{"searchBar":{"inputPlaceholder":"Rechercher par mot-clé ou poser une question","searchBtn":"Rechercher","error":"Veuillez saisir un mot-clé pour effectuer une recherche"}}
{}

Nos marques

{"support":{"yesButton":"Oui","noButton":"Non","feedback":{"title":"Quelles améliorations pouvons-nous apporter ?"},"submitButton":"Soumettre","successMessage":"Merci de nous avoir fait part de vos commentaires.","title":"Cela vous a-t-il été utile ?","feedbackPercentLabel":"personnes ont trouvé cela utile","captcha":{"error":"Veuillez cocher la case appropriée."}}}
Consulter notre FAQ

NetBotz | How to update the Self-signed Certificate?

Issue:
How to update the Self-signed Certificate on NetBotz appliance?

Product Line:
NetBotz 355,450,455,570

Environment: 
NetBotz (All Versions)

Cause: 
The SSL Certificate needs to updated on the appliance

Resolution:

To update the SSL certificate follow the instructions below:

1. Be sure the appliance is registered with DNS and you can ping it by Fully Qualified Domain Name (FQDN). i.e. "ping netbotz.example.com" 

2. Enable Telnet on the NetBotz appliance by using the following URL: http://botname/enabletelnet 
Notes: a. Use HTTPS in the URL if HTTP is disabled. b. Replace 'botname' in the URL with the FQDN or IP address of your NetBotz Appliance. 

3. Telnet to the NetBotz appliance using Windows Command Prompt, PuTTy, or any other Telnet client. 
Username/password on v3.X.X or 4.X.X firmware is root/apc 
Username/password on v2.X.X firmware is root/netbotz 

4. Press Shift+X within 5 seconds after logging in to break to a command line interface where the next steps must be completed. 
 
5. From the command line, run the following commands: 
cd /opt/netbotz/bin 
source ssl-cert-functions 
update_nbSelfSignedCert 

6. Reboot the appliance via Advanced View by going to Tools > Reboot Appliance.

Vous ne trouvez pas ce que vous recherchez ?

Contactez notre service client local si vous avez des questions ou si vous avez besoin de plus de détails ou d'une assistance technique.