{"searchBar":{"inputPlaceholder":"Rechercher par mot-clé ou poser une question","searchBtn":"Rechercher","error":"Veuillez saisir un mot-clé pour effectuer une recherche"}}
{}

Nos marques

{"support":{"yesButton":"Oui","noButton":"Non","feedback":{"title":"Quelles améliorations pouvons-nous apporter ?"},"submitButton":"Soumettre","successMessage":"Merci de nous avoir fait part de vos commentaires.","title":"Cela vous a-t-il été utile ?","feedbackPercentLabel":"personnes ont trouvé cela utile","captcha":{"error":"Veuillez cocher la case appropriée."}}}
Consulter notre FAQ

PowerChute Business Edition not recording lost comms in a serial-to-USB configuration

Issue:
PowerChute Business Edition not recording lost comms in a serial-to-USB configuration

Product:
PowerChute Business Edition

Environment:
All supported Windows OS

Cause:
When you have the following configuration:
* the 940-0272A cable ,
* connecting a serial port on the Smart-UPS SC 1500 to a USB port on a server ,
* and running with the PL2303 driver from the Prolific company,
and the cable is disconnected, accidentally or otherwise, then PCBE is unable to report it as a lost communications event.
(This happens because when the cable is disconnected, the Prolific driver is disabled).

Solution:

If this happens you must reconnect the USB plug to the CORRECT USB port on your server and restart the APC UPS Windows service: "APC PBE Agent".

We strongly recommend, if possible , that you use a serial-to-serial connection to avoid this situation from arising.

NOTE: If issue is connecting Smart-UPS SC to Windows OS using the 940-0272A cable PowerChute Business Edition does not discover the UPS please see Kbase FA283834
 

Vous ne trouvez pas ce que vous recherchez ?

Contactez notre service client local si vous avez des questions ou si vous avez besoin de plus de détails ou d'une assistance technique.