{}

Our Brands

Search FAQs
MGE; Why my NMC (Network Management Card) stops logging new measurement information and new events?

Issue:
MGE; Why my NMC (Network Management Card) stops logging new measurement information and new events?
Product line:
66074 / 34003640SE MGE NMC
Environment:
All Product models, all serial numbers
Cause:
Limited onboard memory
Resolution:
Reset communications (ensure you check the box “Keep TCP/IP parameters”)

Note: the password to reset is "MGEUPS" in caps.

MGE data entry screen
Save current measurements logs and then delete wait a few seconds and new/ current logs will generate. See the first jpg image for information of where and what to clear.

Note: measurements & logs both need to be saved / cleared.
MGE Event log
See the 2nd jpg image for where to reset the communications and keep TCP/IP option.

MGE measurements page
Depending on the frequency of events or data entry it may be a good idea to periodically save the files and then delete to prevent issue from recurring.

APC Belgium

Articles which might be helpful Users group

Discuss this topic with experts

Visit our Community for first-hand insights from experts and peers on this topic and more.