APC Smart-UPS On-Line, 10kVA/10kW, Tower, 230V/400V, 6x C13+4x C19 IEC outlets, Network Card+SmartSlot, Extended runtime, W/O rail kit
SRT10KXLI
Environmental performance of the product Learn more
This product is compatible with
Specifications
| Presentation | High density, double-conversion on-line power protection with scalable runtime. |
|---|---|
| Lead time | Usually in Stock |
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 1000-10000 W | |
|---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
| Main Input Voltage | 230 V 400 V 3 phases |
| Other Input Voltage | 220 V 240 V 380 V 415 V |
| Main Output Voltage | 230 V |
| Other Output Voltage | 220 V 240 V |
| rated power in W | 10000 W |
| rated power in VA | 10000 VA |
| nb of power socket outlets | 6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19 |
| output connector type | Hard wire 3-wire (H N + E) 1 |
| battery type | Lead-acid battery |
| provided equipment | CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card |
| product web sub-family | High density |
|---|---|
| Number of power module free slots | 0 |
| Number of power module filled slots | 0 |
| redundant | No |
| colour | Black |
|---|---|
| height | 43.2 cm |
| width | 26.3 cm |
| depth | 71.5 cm |
| net weight | 111.82 kg |
| mounting location | Front |
| mounting preference | No preference |
| mounting mode | Rack-mounted with kit |
| two post mountable | 0 |
| USB compatible | Yes |
| network frequency | 40...70 Hz auto-sensing |
|---|---|
| number of input connectors | 1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E) |
| input voltage limits | 100...275 V adjustable (half load) 173...476 V adjustable (half load) |
| Maximum configurable power in W | 10000 W |
|---|---|
| harmonic distortion | Less than 2 % |
| output frequency | 50/60 Hz +/- 3 Hz sync to mains |
| crest factor | 3 : 1 |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| bypass type | Internal bypass (automatic and manual) |
| Maximum configurable power in VA | 10000 VA |
| product certifications | CE EAC IRAM RCM VDE |
|---|---|
| marking | CE Mark |
| standards | EN/IEC 62040-1 EN/IEC 62040-2 |
| ambient air temperature for operation | 0…40 °C |
|---|---|
| relative humidity | 0…95 % |
| operating altitude | 0...10000 ft |
| ambient air temperature for storage | -15…45 °C |
| storage Relative Humidity | 0…95 % Non-condensing |
| storage altitude | 0.00…15240.00 m |
| acoustic level | 55 dBA |
| heat dissipation | 1947 Btu/h |
| IP degree of protection | IP20 |
| Run Time | View Runtime Graph |
|---|---|
| Efficiency | View Efficiency Graph |
| number of battery filled slots | 0 |
| Battery recharge time | 1.5 h |
| number of battery replacement quantity | 2 |
| battery voltage | +/- 192 V (split battery referenced to neutral) |
| battery charger power | 1195 W rated |
| Battery power in VAH | 1805 VAh runtime |
| battery life | 3…5 year(s) |
| battery option | SRT192BP2 1 3610 VAh SRT192BP2 2 5415 VAh SRT192BP2 3 7220 VAh SRT192BP2 4 9025 VAh SRT192BP2 5 10830 VAh SRT192BP2 6 12635 VAh SRT192BP2 8 16245 VAh SRT192BP2 10 19855 VAh |
| extended runtime | 1 |
| free slots | 1 |
|---|---|
| control panel | Multifunction LCD status and control console |
| alarm | Audible and visible alarms prioritized by severity |
| Emergency power off | Yes |
| Surge energy rate | 480 J |
|---|
| Package 1 Weight | 126.82 kg |
|---|---|
| Package 1 Height | 46.1 cm |
| Package 1 width | 60 cm |
| Package 1 Length | 100 cm |
| Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn moreResource performance
Energy efficient product
Take-back program available
Well-being performance
Mercury free
RoHS exemption information
REACh Regulation
EU RoHS Directive
Compliant
Environmental Disclosure
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Circularity Profile
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.