Browse FAQs



Can the horizontal cable side channel organizer be installed into a 600mm wide NetShelter SX, VX or SV cabinet?
Cause: Customers need to move cables horizontally from front to rear in a 600mm wide NetShelter cabinet.
ACSC1XX Spare Parts List
BAYING BRACKET NETSHELTER SX ... SCREW M5 X 12 FLT UCUT PHIL M5 X 12 BLK (for baying ... ... Ceiling Tile Adapter 600mm - Spare Part ... .13" X .13" X .13" ... .19" X .19" X .19" ... , 54VDC, WIDE INPUT, FULL SIGNALS, BLACK ... FOOT LEVELING m10 X 51 L X 28 OD NYLOK ... 2"ID X 1 3/4"GD X 1/8 ... ... 333 (for side door panels) ... AP9326] & black cat5e cable)
Can the vertical cable management fingers for 600mm wide NetShelter cabinets be installed into 750mm wide NetShelter cabinets?
... AR7723 into a wide NetShelter SX or SV . NetShelter SX and SV ... compatible with the wide SX or SV cabinets. ... into a 750mm wide cabinet. ... designed for the 600mm wide NetShelter SX cabinets, ... compatible with the 600mm wide cabinets only. In the SX cabinets a better choice may be the ar7580a (42U), AR7585 (45U) or AR7588 ( 48U ) because they offer far more capacity. In the SV cabinets AR7721 and AR7723 are currently the only finger-style vertical cable managers available.
Is there documentation available that shows the rackmount depths for Dell products?
... has other notes regarding compatibility of these rail kits, specific to the NetShelter SX 600mm W x 1070mm D cabinets.
Can AR7715 or AR7725 be Used with Other Side Airflow equipment?
There are side airflow devices other ... NetShelter SX ... may require a side airflow duct kit ... ... AR7715 and AR7725 Side Air Flow Duct ... use with Cisco's side airflow switches. ... when recommending a side airflow duct kit ... insure proper operation the airflow path should be similar to the Cisco models with similar chassis dimensions: 14U x 17.3" W x 24" D. Installing equipment that's not as tall or deep may result in the need of foam and/or duct tape to close off open spaces between the equipment and the duct.
Can the AR8125 NetShelter AV Sliding Shelf be installed into an SX cabinet?
... install the AR8125 NetShelter AV Sliding Shelf ... NetShelter SX ... holes of the NetShelter AV cabinets. ... Will the AR8125 NetShelter AV Sliding Shelf ... In the NetShelter Compatibility Chart the ... ... use with the NetShelter AV cabinets which ... ... 32 screws ( black in color) ... ... rails to the NetShelter AV’s #10 ... ... AR8125 to a NetShelter SX with square ... ... ship with the NetShelter SX cabinets it ... ... screw is too wide to fit through ... ... with a maximum depth of 25. ... If deeper equipment is mounting ... This will reserve the NetShelter SX’s rear vertical mounting rails for use with the deeper mounting equipment.
Will the NetShelter CX fit through standard doors?
They measure 750 mm /29.5” wide x max 1950mm/76.7” tall.


Results 1 - 10 of 50

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.

Contact support