Our Brands

APC Smart-UPS VT 10kVA 400V, w/Internal Maintenance Bypass & Parallel Capability


  • What does the end of commercialization mean ?

    End of commercialization is the last date APC will accept an offer for this reference. However, after Sales Services (repair, spare parts, etc.) will continue until its end of life.

  • Need more help

    Contact Customer Care Center - available 24 a day.

  • What does the end of standard service mean ?

    End of standard service is the last date APC will be able to provide you maintenance services (repair, spare parts, etc.).

  • Need more help

    Contact Customer Care Center - available 24 a day.

Recommended replacement(s)

SUVTP10KH is replaced by:

+ Lifecycle Services



Lead timeSpecial Order - Call for Quoted Lead Times
Main Input Voltage400 V 3 phases
Other Input Voltage380 V
415 V
Main Output Voltage230 V
400 V 3 phases
Other Output Voltage380 V
415 V
Rated power in W8000 W
Rated power in VA10000 VA
output connector typeHard wire 4-wire (3P + E) 1
Hard wire 5-wire (3P + N + E) 1
connections - terminals1 screw terminals
Battery typeExternal battery system
provided equipmentBolt down brackets
CD with software
Network management card
Power modules ship installed
User manual
Installation guide
Bypass wiring configuration5 wire (3P + N + E)
Bypass voltage tolerance+/- 10 % settable from +/- 4/6/8 and 10 %
Number of power module free slots0
Number of power module filled slots0
Height82.3 cm
Width35.2 cm
Depth83.8 cm
Net weight134 kg
Mounting locationFront
Mounting preferenceNo preference
Mounting modeNot rack-mountable
USB compatibleNo
network frequency47...70 Hz auto-sensing
number of input connectors1 hard wire 5-wire (3P + N + E)
input voltage limits304...477 V
Maximum input current14 A
Switching current capacity20 A
Max short time withstand current30 kA
Input harmonic distortionLess than 5 % for full load
Input protection type3-pole circuit breaker
Load power factor0.5 leading to 0.5 lagging
Input Power Factor at Full Load0.98
Maximum configurable power in W8000 W
Harmonic distortionLess than 5 % at full load
output frequency47...53 Hz for 50 Hz nominal sync to mains
50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised
Crest factorUnlimited
UPS typeDouble conversion online
Wave typeSine wave
Output harmonic distortion< 2% for 0 to 100% linear load and < 5% for full non-linear load
Output overload operation10 minutes at 125% and 30 seconds at 150%
Bypass typeBuilt-in maintenance bypass
Built-in static bypass
Maximum output current16 A
Maximum configurable power in VA10000 VA
Product certificationsC-Tick
Ambient air temperature for operation0…40 °C
relative humidity0…95 %
Operating altitude0...3333 ft
Ambient air temperature for storage-35…60 °C
storage Relative Humidity0…95 %
Storage altitude0.00…15240.00 m
Acoustic level64 dBA
Heat dissipation1501 Btu/h
IP degree of protectionIP20
Batteries & Runtime
EfficiencyView Efficiency Graphaction_new_window
Number of battery filled slots0
Number of battery free slots0
Battery recharge time5 h
Additional informationConfigurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Battery power in VAH0 VAh runtime
Battery life3…5 year(s)
Replacement batterySYBT4action_new_window
Extended runtime0
Communications & Management
Free slots0
Preinstalled deviceNetwork management card with environmental monitoring
control panelMultifunction LCD status and control console
AlarmAudible and visible alarms prioritized by severity
Emergency power offYes
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height129 cm
Package 1 Width111 cm
Package 1 Length72 cm
Package 1 Weight173 kg
Number of Units in Package 31
Contractual warranty
Warranty1 year on-site repair or replace with factory authorized Start-Up



Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.